Product Description
Product Description
16139585/1613982300
Type: Gear Flex Coupling
Applied: Atlas Copco
Certificate: iso 9001.
Coupling Selection Method
- Torque – power [kW] • Speed [r/min]
- Type of equipment and application
- Shaft diameters
- Shaft gaps
- Physical space limitation
- Special bore or finish information
Coupling Features
- Good starting performance can change the load starting of the motor to no-load starting, so as to realize the soft starting of the working machine, reduce the current during starting and reduce the starting energy consumption.
- Save electric energy and equipment cost, which can solve the unreasonable situation of the big horse-drawn trolley with load starting machine, save the motor capacity, improve the power factor and motor efficiency of the grid, reduce reactive power loss, save electric energy, and simplify the motor starting equipment and reduce equipment cost.
- The transferred torque can be adjusted, easy to achieve overload protection.When the working machine is overloaded or jammed, the steel ball type safety coupling will slip automatically, which can prevent the motor from burning out and other parts damage.
- Except for the starting and braking stages, the main and driven parts of the steel ball safety coupling have no speed difference, no friction loss and high transmission efficiency.
- Nonmetallic elastic elements are adopted in the steel ball type safety coupling, which can compensate the offset of the linked 2 axes within a certain range, with a small amount of buffering and damping.
- Reliable operation, stable performance, convenient installation, disassembly and maintenance.
Detailed Photos
Determining the right type of flexible coupling starts with the following analysis of the application:
- Prime mover type (motor, diesel engine, etc.) of the drive side of the system
- Actual horsepower and/or torque requirements, not prime motor-rated horsepower (note the range of variable torque caused by periodic or unstable loads, worst-case starting loads,
- Drive system inertia related to prime mover inertia (data available from equipment supplier)
- vibration, linear and torsional vibration (experienced supplier or consultant can help you evaluate vibration) shaft-to-shaft deviation;
- Note the degree of Angle offset (axis is not parallel) and parallel offset (distance between axis centers when axes are parallel but not aligned);
- Also note whether the drive/driven units share the same floor axial (inside/outside) axial motion,
- whether they share distance (the distance between the drive end and the driven axis), and any other space-related restrictions.
We are able to offer a wide range of special couplings, which are based on your samples or drawings.
Due to the refinement of production operations and the high-end technology, we have been able to produce high-quality Rubber Coupling, Trolley Wheel, Flexible Coupling, Flexible Rubber Coupling, Industrial Rubber Coupling, Star Coupling, CZPT type Coupling Spare and other products, widely used in industrial applications.
All these products are tested and checked against the set quality parameters before being sent to the customer. This shows that we are willing to provide our customers with updated and perfect product lines to meet their different needs. In addition, we also provide customized solutions to provide customers with a wide range of space, so that they can choose their favorite products according to their needs and requirements.
More Products for Choose
| Coupling | Coupling |
| 1613949900 | 1613982300 |
| 1614873800 | 1613958500 |
| 165710800 | 165710800 |
| 162357100 | 1619646700 |
| 1615678500 | 165714700 |
| 1615682500 | 1604076100 |
| 1613982300 | 1626510900 |
Tips:
This is only a part of the part numbers, many oil separator filters P/N are not listed, in addition there are replacements filters for many other air compressor brands.
Company Profile
Now over 100,000 quality filters including compressed air filters, Hydraulic Filters and complete filter housing assemblies at wholesale discounts. We offer OEM products as well as high quality replacements, engineered to precise OEM specifications and guaranteed to match the exact form, fit and function as the original equipment. Our company is committed to continuous innovation and further improvement to create, improve the efficiency and productivity of excellence, to achieve the highest level of reliability and performance.
Company team
Our company is located in the beautiful coastal city of HangZhou,is a professional manufacturer of air compressor filters and separators,
We repect the enterprise spirit of “steadyfastness,hard work and responsibility” and creat a good corporate environment based on the operation principle of “Integrity,reliability and innovation”.
With the survival idea of “perfect technology, good service and excellent quality”,
We always adhere to customer first,
aim at serving customer sincerely and touching customer with our service.
We plunge ourselves to provide clear and sustainable comprssed air to our customer,
meanwhile constantly pursue to save the sunning cost of compressor system for them.
Profession, concentration, focus is our corporate philosophy.
Packaging & Shipping
FAQ
Q1. What is your product range?
A: Our products cover replacement hydraulic filter, Air compressor filters, Compressed air filter element, Heavy truck insert filters, Vacuum pump filters, and Some spare parts for compressors.
Q2. Is customized filter or OEM available?
A: Yes, just offer your required specifications and drawings.
Q3. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build new molds, but open new mold fee charged, when you place bulk order, the mold fee can return back.
Q4. What’s your terms of packing?
A: Generally, we pack our goods in neutral boxes,outside brown carton cases. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q5. What’s the terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balancing.
Q6. What’s your terms of delivery?
A: (1)FOB (2)CFR (3)CIF.
Q7. How about your delivery time?
A: Generally, under MOQ quantity take 5-7 working days after receiving your advance payment. The specific delivery time depends on models and the quantity of your order.
| Customized: | Non-Customized |
|---|---|
| Standard Component: | Standard Component |
| Type: | Gear Flex Coupling |
| MOQ: | 1unit |
| Lead Time: | Aroud 3-5 Working Days After Order Confirmed |
| Package: | PP Bag Inside, Inner Carton, Export Carton Outside |
| Samples: |
US$ 35/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Programming With Couplings
A coupling is a mechanical device that connects two shafts together and transmits power. Its purpose is to join rotating equipment and allows some degree of end-movement or misalignment. There are many different types of couplings. It’s important to choose the right one for your application.
Mechanical connection between two shafts
There are many ways to achieve mechanical connection between two shafts, including the use of a coupling. One common type is the beam coupling, which is also known as a helical coupling. It is used for transmission of torque between two shafts. This type of connection accommodates axial, parallel and angular misalignments.
The hubs and shafts of a worm gear are connected together by a coupling. This mechanical connection allows one shaft to turn another without causing a mechanical failure. This type of coupling is made from sliding or rubbing parts to transfer torque. However, the coupling is not designed to withstand jerks, so it isn’t suitable for high-speed applications.
The use of a coupling is common in machinery and equipment. It helps transmit power from one drive shaft to the other, while adding mechanical flexibility. It is also useful for reducing the impact and vibration caused by misalignment. It also protects the drive shaft components from wear and tear.
A double-hook coupling can be used to provide a uniform angular velocity at the driven shaft. Another example is a double-jointed coupling. A double-jointed coupling can be used to connect shafts that are not directly intersecting. The double-jointed yoke can be used for the same purpose.
A shaft coupling is a device that maintains a strong mechanical connection between two shafts. It transfers motion from one shaft to another, at all loads and misalignments. Unlike a conventional linkage, a shaft coupling isn’t designed to allow relative motion between the two shafts. Couplings often serve several purposes in a machine, but their primary use is torque and power transmission.
Functions that control the flow of another function
One of the simplest programming constructs is a function that controls the flow of another function. A function can take an argument and return a different value, but it must be ready to return before it can pass that value to another function. To do this, you can use the goto statement and the if statement. Another way to control flow is to use a conditional statement.
Criteria for selecting a coupling
There are several important factors to consider when choosing the right coupling. One of the most important factors is coupling stiffness, which depends on the material used and the shape. The stiffness of a coupling determines its ability to resist elastic deformation. A stiff coupling is desirable for certain types of applications, but it’s undesirable for others. Stiffness can reduce the performance of a system if there’s too much inertia. To avoid this, ensure that the coupling you choose is within the recommended limits.
The size of a coupling is also important. Different coupling types can accommodate different shaft sizes and shapes. Some couplings have special features, such as braking and shear pin protection. When choosing a coupling, you should also consider the type of driven equipment. If you need to connect a high-torque motor, for example, you’ll want to choose a gear coupling. Likewise, a high-speed machine may require a disc coupling.
Another factor to consider when selecting a coupling is the torque rating. Despite its importance, it’s often underestimated. The torque rating is defined as the torque of the coupling divided by its OD. In some cases, torque may fluctuate during a cycle, requiring a coupling with a higher torque rating.
Torsionally flexible couplings are also important to consider. Their design should be able to withstand the torque required during operation, as well as the required speed. The coupling should also have a high degree of torsional stiffness, as well as damping. Furthermore, a damping coupling can reduce the energy wasted through vibration.
The sizing of a coupling is also determined by the torque. Many engineers use torque to select the correct coupling size, but they also take into consideration torsional flexibility and torsional stiffness. For example, a shaft may be able to handle large torque without damaging the coupling, while a disk may be unable to handle large amounts of torque.
Besides torque, another important consideration in coupling selection is the cost. While a coupling may be cheaper, it may be less reliable or easier to maintain. Couplings that are difficult to service may not last as long. They may also require frequent maintenance. If that’s the case, consider purchasing a coupling with a low service factor.
There are many different types of couplings. Some require additional lubrication throughout their lifetime, while others are 100% lubrication-free. An example of a 100% lubrication-free coupling is the RBI flexible coupling from CZPT. This type of coupling can significantly reduce your total cost of ownership.
In addition to the above-mentioned benefits, elastomeric couplings are low-cost and need little maintenance. While they are often cheaper than metallic couplings, they also have excellent shock absorption and vibration dampening properties. However, they are susceptible to high temperatures. Also, they are difficult to balance as an assembly, and have limited overload torque capacity.
editor by CX 2023-05-24
Best China manufacturer & factory Super grade SWL series screw erhand-driven mechanical lift worm gear hand wheel screw elevator SWL series electric worm gear scr With high quality best price
We also can design and make non-standard products to meet customers’ special requirements.
Overview
Quick Details
-
Our company is located in XiHu HangZhou Zhejiang Province. T
- Applicable Industries:
-
Building Material Shops
- Output Torque:
-
1.8-2430N.M
- Input Speed:
-
750-1500rpm
- Output Speed:
-
0.64-350rmp
- Place of Origin:Zhejiang, China
- Brand Name:
-
OEM
- Certification:
-
ISO9001-2008
- Lifting Capacity:
-
As request
- Lifting Height(mm):
-
As request
- Overall Width(mm):
-
As request
- Gear material:
-
Low carbon high alloy steel
- Heat treatment:
-
Carburising, quenching, gear grinding
- Diameter & Length of Screw:
-
Designed as request
- Bearing:
-
C&U
- gear precision grade:
-
din 4
Supply Ability
- Supply Ability:
- 500 Unit/Units per Month
Packaging & Delivery
- Packaging Details
- Standard exporting package
- Port
- Ningbo Port, Shanghai Port
-
Lead Time
: -
Single direction FREE WHEEL (RA) Single direction PAWL torque limiter (SW) Disc torque limiter clutch with spring (FFT)
Quantity(Boxes) 1 – 1 >1 Est. Time(days) 20 To be negotiated
Online Customization
Specification
Super grade SWL series screw erhand-driven mechanical liftIt must be fixed on a flat surface to avoid either vibrations or tensions nonwished worm gear hand wheel screw elevator SWL series electric worm gear scr
Advantage:
SWL Worm-bolt lifter has the features of compacted structure, light and portable, flexible, reliable, long service life, easy to installation, and self-locking while stop.
Application Industries:
SWL series screw jacks are widely used in industries such as metallurgy,mining,hoisting and transportation, electrical power,energy source, construction and building material,light industry and traffic industry
Company information
Quality control
Packing
Packing Details : Standard carton/Pallet/Standard wooden case
Delivery Details : 15-30 working days upon payment
Delivery
Our Certifications
FAQ
Q1: What information should I tell you to confirm the product?
A: Model/Size, Transmission Ratio, Shaft directions & Order quantity.
Q2: What can i do if I don’t know which one I need?
A: Don’t worry, Send as much information as you can, our team will help you find the right one you are looking for.
Q3:What is your product warrenty period?
A:We offer one year warrenty since the vessel departure date left China.
If you have another question, pls feel free to contact us.
Contact us
Find nord helical worm geared motor Cost China in Zamboanga City Philippines Complete Details About Swl Series Worm Gear Nut Travel 90 Degree Jack Screw Lifting Motor Reducer with top quality
We – EPG Group the biggest gearbox & motors , couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
worm gear screw jack cubic screw jack 0.1kn system electric motor screw jack with engine control
Related Product
Advantage:
SWL Worm-bolt lifter has the features of compacted structure, light and portable, flexible, reliable, long service life, easy to installation, and self-loc ept while stop.
Application Industries:
SWL series screw jacks are widely used in industries such as metallurgy,mining,hoisting and transportation, electrical power,energy source, construction and building material,light ept and traffic industry
| Certification | ISO9001-2008 |
| Lifting Capacity | As request |
| Lifting Height(mm) | As request |
| Overall Width(mm) | As request |
| Gear material | Low carbon high alloy steel |
| Heat treatment | Carburising, quenching, gear grinding |
| Diameter & Length of Screw | Designed as request |
| Bearing | C&U |
| gear precision grade | din 4 |
Company information
Established in 1985, SANLIAN TRANSMISSION MACHINERY CO., LTD is a high and new technology enterprise engaging in research, develop and manufacture for reducer & speed variator, one of the director member of China Reducer Association of China General Machinery.
It covers more than 40,000 square meters, has more than 400 staff , 20% of whom are technicians, equipped with more than 300 sets the most advanced accurate numerical control equipment, including German HOFLER forming gear grinding machine to improve quality.
set up more than 30 national sales branches to serve our customers in time and thoroughly.
Our products also exported to more than thirty countries main in Europe, Asia America, and Africa, with high reputation.
Quality control
Packing&Delivery
Pac ept Details: Standard carton/Pallet/Standard wooden case
Delivery Details : 15-30 wor ept days upon payment
Related Product
| Precision Planetary gearbox | Robot RV gearbox speed reducer |
| Custom made Non-standard Gearbox | UDL Series Variator |
| PYZ Series Helical Tooth Shaft Mounted Reducer | 8000 Series Cycloidal Reducer |
| SLT Series Spiral Bevel Gearbox | SLSWL Series Worm Screw Jack |
| SLP Series Planetary Reducer | SLH/SLB Series High Power Reducer |
| NMRV Series Worm Reducer | BKM Series Helical-hypoid Reducer |
| SLRC Series Helical Reducer | SLSMR Series Shaft Mounted Reducer |
| SLXG Series Shaft Mounted Reducer | X/B Series Cycloidal Reducer |
| SLR/SLF/SLK/SLS Series Helical Reducer | AC/DC Motor |
Main product list: 16 series including SLR/SLS/SLK/SLF series hard tooth flank gear reducer , SLRC series aluminium case helical gear reducers,SLH\SLB series high power speed reducer, SLP series planetary speed reducer, X/B series cycloidal reducer, SLXG series shaft-mounted gear box, SLSWL series worm screw jack, SLT series helical cone gear box, altogether more than 10,000 ratios, various specification make us at the head of domestic transmission industry, widely serve the mechanical transmission field of light & heavy ept such as: beer & beverage, mining machine, food packing, textile printing, rubber & plastic material, petrochemical industry, jack-up transportation, pharmacy & process hides, environmental protection equipment.
Certificate
FAQ
1.Payment Term: TT, L/C
2.Delivery time: about 30 days from receive payment.
3.We accept customized products as per your special requirement.
4.Xihu (West Lake) Dis.lines for the Selection:Usually we can select one machine which is suitable for you with some informations from you,such as ratio/motor speed/mounting dimension/ out torque etc.
5.If the minimum order amount is in excess of $10000, there are preferential.
Q1: What information should I tell you to confirm the product?
A:Model/Size, Transmission Ratio, Shaft directions & Order quantity.
Q2: What can i do if I don’t know which one I need?
A:Dont worry, Send as much information as you can, our team will help you find the right one you are loo ept for.
Q3: What is your product warranty period?
A:We offer one year warranty since the vessel departure date left China.
Q4: Are you ept company or manufacturer ?
A: We are factory.
Q5: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q6: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q7: What is your terms of payment ?
A: Payment=1000USD, 30% T/T in ept ,balance before shippment.
If you have another question, pls feel free to contact us as below:
Contact Us
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.
