Tag Archives: gear coupling

Shanghai China in Sydney Australia hirth gear Yulong in Makhachkala Russian Federation gear type coupling near me shop Zjb-1200 Roots Vacuum Pump for Metallurgy with top quality lowest price

Shanghai China in Sydney Australia hirth gear Yulong in Makhachkala Russian Federation gear type coupling near me shop Zjb-1200 Roots Vacuum Pump for Metallurgy with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Pump description:

Model ZJ Mechanical Booster Pump, also known as a Roots pump, is a volumetric pump.It employs a pair of rotors, identical and in 8-figure with certain clearance between them in the pump housing, rotating at the same speed in opposite directions to perform function of suction and discharge of gas. The two rotors are supported by rolling bearings in the end covers of the pump, rotating at high speed and are kept at a fixed relative position by a pair of timing gears. The end clearance between rotors and end covers are fixed by adjustable metal shims between the bearing housings and the end cover at the fixed end, which ensures one-direction expansion of the rotor when temperature rises during its operation.

Four sets of inner seals (also known as piston ring) in the two end covers prevent lube oil entering into the pump housing. The shaft seal at the front-end cover, also called as framework oil seal or shaft seal, prevents leakage of air into the pump housing.

In order to reduce temperature of the pump, all models of pumps (expect the two smallest models) are equipped with a gearbox cooler and front-end cover cooler.

Power is transmitted through a coupling or V-belt from the motor to the driving shaft of the pump and then through synchronizing gears to the driven shaft

Specifications:

 

   Model Suction capacity         (L/S)

Limit vacuum

    (≤Pa) 

 Speed

  (rpm)

Motor Power

      (kw)

Inlet Dia.

   (mm)

Outlet Dia.

    (mm)

Weight

    (Kg)

 Recommended backing pump(model)
   ZJ-70          70      6×10-2   2780         1.5     80      50      87       2X-8
  ZJB-70      5×10-2      100
  ZJ-150A          150      6×10-2   2900          3     100      100      198       2X-15
  ZJB-150      5×10-2      215
  ZJ-300          300      6×10-2   1450          4     150       150      490       2X-30A
  ZJB-300      5×10-2      480
  ZJ-600          600      6×10-2   2900         5.5     150       150      490       2X-70A
  ZJB-600      5×10-2      503
  ZJ-1200A         1200      6×10-2    1450          11      300       300     1550       2X-70A            (2sets)
  ZJB-1200      5×10-2      250       250     1580

Applications:
The main  advantage  of Roots  vacuum pump  is that  it can  operate  with high  pumping speed under  lower suction  pressures, however,  has to  be backed by  a backing  pump.Under  normal working conditions, it is  permissible to not add  by-pass pipes.Roots vacuum pump should not operate with a higher-pressure  difference than allowable,otherwise  overheating   and   overload  will   cause  damage   of  Roots   vacuum  pump.
Therefore, proper backing pump and necessary protection devices must be considered.Oil sealed mechanical  pump is usually  selected as   the fore   vacuum   pump.  Other   types   of backing   pumps   may   be   used   where    their requirement for ultimate vacuum is not too  strict. Particularly, when gas  pumped containing large amount of  vapor, water-ring vacuum pump  maybe   an  ideal   option  though   ultimate  vacuum achieved is on the low side.

Product display:

Company overview:

Contact us:

 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Shanghai China in Sydney Australia hirth gear Yulong in Makhachkala Russian Federation gear type coupling near me shop Zjb-1200 Roots Vacuum Pump for Metallurgy with top quality lowest price

Two China in Blantyre-Limbe Malawi nylon gear coupling sales Stage in Kabul Afghanistan pinion coupling manufacturer High Filling Masterbatch Twin Screw Granulator with top quality lowest price

Two China in Blantyre-Limbe Malawi nylon gear coupling sales Stage in Kabul Afghanistan pinion coupling manufacturer High Filling Masterbatch Twin Screw Granulator with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

The characteristics
1.The first stage is TSE twin screw extruder without die.Through the combination of barrel and screw, the extruder can exert  its EPT ability to make the thermo sensibility material like PVC melting, compounding,dispersing and decentralizing under the condition of no back pressure
2.The second stage is SJ single screw extruder.Because of the lower rotating speed, it can complete melting,compounding lengthways and forming srands steadily, avioding over heating.
     
Technical data:

Model   Screw diameter L/D Rotary rate Motor power Output
SP50-120 TSE-50 50.5mm 24-48 500r/min 37-45kw 200-350kg/h
SJ120 120mm 7-20 65-85r/min 30-37kw
SP65-150 TSE-65 62.4mm 24-48 400-500r/min 55-75kw 350-550kg/h
SJ150 150mm 7-20 65-85r/min 37-45kw
SP75-180 TSE-75 71mm 24-48 400-500r/min 90-110kw 500-650kg/h
SJ180 180mm 7-20 65-85r/min 45-55kw
SP95-200 TSE-95 93mm 24-48 300r/min 160-220kw 500-1000kg/h
SJ200 200mm 7-20 85r/min 90-110kw

 
Two stage air cooling extruders

Features:
Combine the high speed and extensive mixing of processing and the low speed, low temperature, and low shear of single screw processing;
Ideal for compounding of heat and shear-sensitive materials.
 
Application:
PVC compounds for cable, shoe sole, transparent container, and medical applications EVA shield cable compounds;
Carbon black master batches of PE, EVA, etc.

Detailed data for SP75-180:
 
1.Main extruder:TSE-75/500-110–32
1) Screw diameter: 71mm. L/D = 32
2) Main drive motor: AC 110Kw, Speed regulated by ABB transducer imported   from Switzerland.  
3) Screw rotary speed: 50~500rpm
4) The barrels are equipped with bimetallic liners (45#steel+α101), processing heat treatment. HRC=60~62. The material of screw elements is high-speed steel 38CrMoAlA, nitrogen treatment. HRC=58~60.
5).The 1st barrel is the main feeding vent, the 6th is for degassing,  9th is vacuum section , and the others are closed barrels.
6)Casting copper heaters for 2-3th barrels. The others are equipped with casting  aluminum heaters. All heating power: ~50kw.
The extruder figure:
Feeding                                           Vacuum 

1 2 3 4 5 6 7 8 Hydraulic screen changer
 die section

7) Reducing and distributing gearbox:
  The gearbox reduces the motor speed to the speed of the screw shafts and distributes it to the two output shafts. This gearbox output torque can reach     4.8T/A3
    The gearbox consists of:
l Involute gear teeth couplings between the output shafts and screw shafts
l Integrated thrust bearing assembly, radial bearings of the output axis are NSK products 
l Bottom part of casing designed as oil sum
8) Soft water cools the barrels with condenser.
      Material of input and output pipes is stainless steel. 
      Solenoid valve: imported products. 
      Manual valve: stainless steel. 
      The water pump motor in the soft water system is 0.55kw. 
      The soft water is distilled water.
2.Single extruder SJ-180/85-90-22
1)180mm; L/D = 28, rotary speed is 6~65rpm.
2)Main drive motor: AC 90Kw. ABB transducer,.
3)The material of barrels and shafts is nitride steel (38CrMoAlA).
4)Water-cooling inside the core of shafts.
5)Casting aluminum heaters, All heating power: ~36kw
6Enlarged screen changer  , material through 72 hours’ nitrogen treatment . The channel is short, with little melt left and easy to clean.
7)Tailor-made flange:connect the single and twin screw extruder.

Certification: 

 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Two China in Blantyre-Limbe Malawi nylon gear coupling sales Stage in Kabul Afghanistan pinion coupling manufacturer High Filling Masterbatch Twin Screw Granulator with top quality lowest price

Heavy China in Hyderabad India gear sleeve coupling factory Duty in Florianopolis Brazil gear type coupling shop Centrifugal Horizontal Ultra Chrome A05 Slurry Pump 8 6 Dah with top quality lowest price

Heavy China in Hyderabad India gear sleeve coupling factory Duty in Florianopolis Brazil gear type coupling shop Centrifugal Horizontal Ultra Chrome A05 Slurry Pump 8 6 Dah with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Introduction: 
1. HS series slurry pump is designed for the continuous pumping of high abrasive, high density slurries with minimal maintenance requirements. The wearing parts are made of ultra chrome or and rubber. It will maintain high efficiency over the wear life of its components. 

2. The metal wet parts and rubber ones can be interchangeable for handling different liquids or slurries.

3. HS slurry pumps are available in sizes ranging from 1 inch to 18 inch discharge and feature high efficiency performance capable of flow rates from 10.8 to 5400 m³/h and heads up to 125 meters for high head models. 

Features:
1. Cylindrical structure of bearing assembly: convenient to adjust the space between impeller and front liner
and can beremoved completely;
2. Interchangeable anti-abrasive wet parts made of high-chrome alloys;
3. Casing halves of ductile iron with external reinforcing ribs provide high operating pressure capabilities
and an extra measure of safety.
4. The discharge branch can be oriented to any eight positions at the interval of 45 degrees;
5. Various drive types: DC(direct connection), V-belt drive, gear box reducer, hydraulic couplings, VFD,
SCR control, etc;
6. The shaft seal uses the packing seal, expeller seal and mechanical seal

Typical Application:

• Mineral processing • Mining • Coal Washery • Cyclone feeds
• Bentonite • Chemical slurry • Tailing • Mill grinding
• Ash handing • Tunnel • Waste sludge • Coarse sand
• Lime mud • Phosphoric acid • Dredging • Construction
• Alumina Industry • Power Plant • Potash Fertilizer Plant • Other industries
• Iron ore sand • Copper Concentration • Gold mine •Molybdenum

Model Max Power
(Kw)		 Inlet & Outlet size (inch) Material for Wear Parts Flow Rate (Q) Head
(H)
meter		 Speed
(RPM)		 Impeller Dia.
(mm)
m³/hr l/s
25HS-B 15 1.5/1 M 12.6~28.8 3.5~8 6~68 1200~3800 152
R 10.8~25.2 3~7 7~52 1400~3400 152
40HS-B 15 2/1.5 M 32.4~72 9~20 6~58 1200~3200 184
R 25.2~54 7~15 5.5~41 1000~2600 178
50HS-C 30 3/2 M 39.6~86.4 11~24 12~64 1300~2700 214
R 36~75.6 10~21 13~46 1300~2300 213
75HS-C 30 4/3 M 86.4~198 24~55 9~52 1000~2200 245
R 79.2~180 22~50 5~34.5 800~1800 245
100HS-D 60 6/4 M 162~360 40~100 12~56 800~1550 365
R 144~324 40~90 12~45 800~1350 365
150HS-E 120 8/6 M 360~828 100~230 10~61 500~1140 510
R 324~720 90~200 7~49 400~1000 510
200MS-E 120 10/8 M 666~1440 185~400 14~60 600~1100 549
200HS-ST 560 10/8 M 612~1368 170~380 11~61 400~850 686
R 540~1188 150~330 12~50 400~750 686
250HS-ST 560 12/10 M 936~1980 260~550 7~68 300~800 762
R 720~1620 200~450 7~45 300~650 762
300HS-TU 560 14/12 M 1260~2772 350~770 13~63 300~600 965
R 1152~2520 320~700 13~44 300~500 965
350HS-TU 1200 16/14 M 1368~3060 380~850 11~63 250~550 1067
450HS-TU 1200 20/18 M 2520~5400 700~1500 13~57 200~400 1370
25HHS-C 30 1.5/1 M 16.2~34.2 4.5~9.5 25~92 1400~2200 330
50HHS-D 60 3/2 M 68.4~136.8 19~38 25~87 850~1400 457
75HHS-E 120 4/3 M 126~252 35~70 12~97 600~1400 508
100HHS-E 120 6/4 M 324~720 90~200 30~118 600~1000 711
150HHS-S 560 8/6 M 468-1008 130~280 20~94 500~1000 711

For the material of wearing parts,
“M” = metal, ultra chromium alloy;         “R” = anti-abrasive rubber

Contact

Welcome to contact us any time for details.
Your inquiry will get our prompt attention and response !
 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Heavy China in Hyderabad India gear sleeve coupling factory Duty in Florianopolis Brazil gear type coupling shop Centrifugal Horizontal Ultra Chrome A05 Slurry Pump 8 6 Dah with top quality lowest price

Factory China in Oklahoma City United States rexnord gear coupling near me Custom in Khartoum Sudan falk 1040g20 supplier Vertical Grain Bucket Elevator for Maize Corn Paddy with top quality lowest price

Factory China in Oklahoma City United States rexnord gear coupling near me Custom in Khartoum Sudan falk 1040g20 supplier Vertical Grain Bucket Elevator for Maize Corn Paddy with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Factory custom vertical grain bucket elevator for maize corn paddy

Model Head wheel dia. Capacity(t/hr) Belt speed Bucket capacity  Height(m)
TDTG30/16 300 15-20 2.2-3.3 1.05 45
TDTG50/19 500 30-40 2.2-3.3 1.60 45
TDTG50/23 500 40-50 2.2-3.3 1.9 45
TDTG50/28 500 50-60 2.2-3.3 2.05 45
TDTG60/23 600 70-80 2.2-3.3 2.27 45
TDTG60/28 600 90-100 2.6-3.6 2.5 45
TDTG60/33 600 100-150 2.6-3.6 5.5 45
TDTG60/41 600 160-200 2.6-3.3 8.4 40

Description:

The TH series bucket elevator is independently developed byJibao and is a fixed installation mainly used for the vertical continuous conveying of powdery materials or granular materials. The equipment is of straightforward structure, compact design, good sealing performance, easy installation, and maintenance, allowing positive and reverses material feeding, as well as flexible process configuration and layout.

TH series bucket elevators are available in direct coupling drive, sprocket driven or gear reducer drive, delivering straightforward structure and easy arrangement. The installation height is optional, but the maximum height elevator not beyond 40m.
 

Application:

Bucket elevators can handle a variety of materials, and therefore are used in many different industries and applications, though generally, they are not suited for wet, sticky materials, or materials that are stringy or tend to mat or agglomerate. They are frequently found in power plants, fertilizer plants, pulp & paper mills, and steel production facilities. Some of the most common materials for which bucket elevators are employed include:

 

1.Aggregates            2.Animal Feeds

3.Calcined Coke       4.Coal

5.Fertilizer                 6.Fly Ash

7.Frac Sand              8.Minerals

9.Potash                   10.Lime

 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Factory China in Oklahoma City United States rexnord gear coupling near me Custom in Khartoum Sudan falk 1040g20 supplier Vertical Grain Bucket Elevator for Maize Corn Paddy with top quality lowest price

Competitive China in Oklahoma City United States elecon fluid coupling shop Price in Nagoya Japan esco gear coupling factory Diesel Engine Wood Sawdust Pellet Machine with top quality lowest price

Competitive China in Oklahoma City United States elecon fluid coupling shop Price in Nagoya Japan esco gear coupling factory Diesel Engine Wood Sawdust Pellet Machine with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

China Home Use Diesel Engine Driven Wood Pellet Press

 

Model Output (kg) Power (hp) Pellet (mm) Fuel consumption (L/H) Packing size
(mm)		 Weight
(kg)
200D 100-120 15 hp 6,8 2.3 1250*650*1200 450
250D 150-200 22 hp 3.36 1300*700*1300 650
300D 250-350 32 hp 6,8,10 4.10 1650*750*1400 800
350D 300-500 42 hp 5.88 800*700*1200
1350*1100*1100		 950

Product Introduction:

1. Our diesel pellet machine can produce wood pellet and feedstuff pellet. It may also be applicable to biological fertilizer for low-temperature granulation. Diesel Drive Pellet Mill is suitable for large farms and organic herbal medicine and chemical industry, etc.

2. The raw material of the diesel wood pellet machine: wood sawdust, rice husk, straw, bamboo power, cotton stalk, cottonseed skins, weeds, crop stalks and other plant wastes, especially low-bonding and unformed materials.

3. The moisture of raw materials should be less than national standard of 13%. If not, the raw material must be dried.

Features 

  1. Adopt high precision gear drive. Output is 20% larger than that of belt drive.
  2. Advanced bearing and oil seal guarantee an efficient and stable working process.
  3. Feeding device adopts frequency conversion motor, ensuring continuous and even feeding.
  4. Different size of diameter for pellet hole makes various sizes of pellets possible. 
  5. Flexible coupling shaft with novel structure ensures a stable pelletizing process and low break-down possibility.
  6. Permanent magnet device can remove impurities in the pelletizing process.

Working Principle:

After grinding and drying process, the materials will be sent into feeding device and mixed in the conditione,Then they are forced into the pelletizing chamber by the imperative feeder. In the chamber, materials will be squeezed between the rollers and die to be foremed into cylinder shape pellets. and then the cutting 
knives will cut the pellets into specified size while the pellets are extruded.

Applicable scope

This machines are powered by Diesel engine. It is mainly used to compress crushed sawdust, straw ,hay, soya, corn, stalk ,bamboo powder, rice husk, seed skin, peanuts shell clover, cotton seed Husk cotton/
corn/sunflower stalk.etc all kinds of powder materials into cylindrical shape particles(pellet) for the fuel.

Final Wood Pellets:

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Competitive China in Oklahoma City United States elecon fluid coupling shop Price in Nagoya Japan esco gear coupling factory Diesel Engine Wood Sawdust Pellet Machine with top quality lowest price

Hazardous China in Geneva Switzerland hydax gear coupling manufacturer Waste in Lviv Ukraine gear coupling 102 sales Metal Drum Plastic Recycling Cutting Machine Shredder with top quality lowest price

Hazardous China in Geneva Switzerland hydax gear coupling manufacturer Waste in Lviv Ukraine gear coupling 102 sales Metal Drum Plastic Recycling Cutting Machine Shredder with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Hazardous Waste Metal Drum Plastic Recycling Cutting Machine Shredder

Descriptions

The DGS General Purpose Single Shaft Shredder has a 457mm diameter profiled rotor made of solid steel, operating at a speed of 74rpm. The concave ground, aggressive 4-way rotating knives are mounted in the grooves of the profiled rotor with special knife holders. This enables a reduction of the cutting gap between the counter knives and the rotor which guarantees a high flow rate, low power consumption and maximum output of shredded material.

The hydraulically operated ram feeds the material automatically in the rotor’s cutting chamber by load-related controls. The hydraulic system is equipped with high-pressure valves and volumetric flow controls which can be set according to the requirements of the input material.

Extremely robust pedestal bearing housings are mounted outside the machine and separate to the cutting chamber to prevent dust and dirt penetrating into the oversized bearings. This ensures a long service life and minimum service and maintenance.

Power is transmitted from the motor by a drive belt via an oversized gearbox which is located on the shaft end on one end of the rotor.

A safety switch prevents machine startup when the front panel is open and the machine features emergency stop buttons on the machine body and control panel.
 

 Specificatoins

Layout

Features

  • Large diameter flat rotor
  • Machined pocket knife holders
  • Optional hard facing – Concave ground square knives
  • Robust ram construction
  • Heavy duty guide bearings
  • Universal couplings
  • Low speed, high torque geared drive
  • Reduced footprint (compared to horizontal pusher designs)
  • Powerful hydraulic swing type ram
  • Bolt in drive shafts
  • Oil cooling on ram and gearbox
  • Two speed hydraulic system
  • Multiple rotor designs
  • Ram comb plate
  • Amp meter control

Options

  • Hydraulic screen cradle
  • Gearbox with shrink disc
  • Rotor cooling
  • Pipe spacer
  • Touch screen PLC Hopper mounted viewing mirror
  • Increased motor drive
  • Hydraulic drive

Applitions

  • PLASTICS
  • RUBBER
  • WOOD
  • BIOMASS
  • PAPER
  • ALTERNATIVE FUELS (RDF/SRF)
  • DOMESTIC & COMMERCIAL WASTE

Factory
Since its foundation DGM Recycling Systems have been at the forefront of innovation and EPT in the development of cost effective and reliable recycling solutions. As a wholly owned subsidiary of Miracle Automation Engineering Group, a pioneer in automation systems for the automotive and material handling industries, DGM continues to strive for excellence in the field of size reduction and recycling. 

Suppliers

Certificates
All of our shredders and granulators have been approved CE certification.

Packaging & Loading

1. Several layers of plastic wrapping film and cardboard to protect plastic recycling machine from dust and moisture.

2. Plastic packing strap belt to fasten wrapping film and machines, also to fix machines in containers.

3. Wooden case is used as the outside package and spare parts when choosing by LCL, air or international express.

4. Excellant logistic team to guarantee the shredder and granulators machines to be safely shipped to customer appointed loaction.

5. If you have any other request for the packaging or loading, we will try our best to meet your demands.

FAQ

Q1: Are you a trading company or a factory ?
DGM is a factory with 10 years experience in machinery manufacturing, and 20 years experience in technology.

Q2: Will you provide pre-sale services?
DGM consists of experienced specialists, we will offer a suitable solution according client’s requirement in time.

Q3: Is your after-sales service excellent?
At DGM we have a highly trained team of service personnel to handle all manner of customer service enquiries. Whether it is EPT parts, technical assistance, or just general operation advice we offer our customers genuine 24/7 support and after sale service.

We have an international network which ensures wherever you are in the world you receive localized high level support.

Our technical team has decades of experience in the field of size reduction and recycling and we are on hand to offer assistance in installation, commissioning, staff training and general technical assistance.

Q4: Where is your factory?
Address: No.1.Fengqi Road, Xihu (West Lake) Dis. District , HangZhou City, ZheJiang Province, China

Q5: what is your contact informatoin?
Fax: 0086-571-88220971: +86 510 8357 5710
Telephone: +86 510 8357 2002
Mobile  +86 18762812155 

Q6: Could we visit your factory and test the machine?
We warmly welcome you to visit our factory anytime,and we are very glad to test our machine with your raw material.

 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Hazardous China in Geneva Switzerland hydax gear coupling manufacturer Waste in Lviv Ukraine gear coupling 102 sales Metal Drum Plastic Recycling Cutting Machine Shredder with top quality lowest price

Good China in Santo Domingo Dominican Republic rubber coupling gearbox near me shop Price in Gujranwala Pakistan face gear coupling factory Centrifugal Sea Sand Pump with top quality lowest price

Good China in Santo Domingo Dominican Republic rubber coupling gearbox near me shop Price in Gujranwala Pakistan face gear coupling factory Centrifugal Sea Sand Pump with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Horizontal Dam Sea River Big Particle Sand Gravel Dredge Pump

General
AMG/AMGH dredge pump is designed for continuously handling the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. They are suitable for delivering slurry
in mining, explosive sludge in metal melting, grudging in dredger and course of river, and other fields. Type AMGH pumps are of high head ones
 
Overview
Construction of this pump is of single casing connected by means of clamp bands and wide wet passage.
The wet parts are made of Ni hard and high chromium abrasion resistance alloys.
The discharge direction of dredge pump can be oriented in any direction of 360 degrees.
This type of pump possesses the advantages of easy installation and operation, good performance of NPSH and abrasion resistance.
 
Drive types
V-belts driven, EPT driven, gear box driven, hydraulic coupler driven, variable frequency driven, thyristor speed control etc. 
 
Structural Features
     – Single stage, single suction, horizontal centrifugal dredge pump
     – Wet parts such as casing, impeller, liner plate in anti-abrasion high chrome cast iron alloy.
     – Horizontal-central-split container bracket easy for maintaining 
     – Packing or mechanical seal
     – Protective shell surrounding the casing ideal for heavy duty
     – Hydraulic optimization design, high-efficient, energy-saving and stable operation

Construction

Application
Heavy duty Mining Process     Coal Preparation Plant
Cyclone Feeds                        Mineral Processing
Tailings                                    Mill Grinding
Slurry Feeding System            Heavy Refuse Removal
Pulp And Paper                       Dredging
Abrasive Slurry                        High Density Slurries
Ash Handling                           Industrial Processing

Eight tips for maintenance dredge pump
1. When operated dredge pump, the bearing temperature can not more 35 oC than ambient. The max can not EPT 80 oC.
2. If abnormal noise happened shall stop the dredge pump right now and check where is wrong.
3. Before stop the pump, stop the gate valve, pressure gauge first and then the motor.
4. For the fist month work, the pump shall change the lubricating oil for the first 100hours, and then change one time per 500hours.
5. Adjust the packing gland frequently to make sure the leakage as the standard.
6. Check the shaft sleeve regularly, if be abrasive badly shall change timely.
7. During the cold winter before stop, should disassembly the discharge plug screw under the pump casing, and discharge the liquid in the casing to avoid frost crack.
8. It stop the dredge pump long term, shall disassembly the pump completely, make the parts dry, and then smear oil on the rotor parts and connect location. The last assembly well.

>>>Company Introduction

HangZhou EPT Machinery Co., Ltd is one over 30 years experienced pump manufacturer (established at 1986) in mining and mineral, power plant, dredging and dredge, hydraulic, irrigation, pulp transfer, chemical, construction, sea water and oil & gas transfer etc.; EPT Machinery is the pump factory has its own pump selection & design, research and development team to assure provide you efficient, energy saving slurry pump, water pump, diesel water pump, chemical pump and irrigation pump in selection & design, use and maintenance program. 

EPT Machinery is the pump factory approved by ISO9001, ISO14001 and OHSAS18001. We also have the certificate of CE. Our factory is over 50,000 square meters with the professional engineer over 20. The Max casting parts weight we could do one time is 7 tons. And we have capacity to produce 600 tons per month and with the heat treatment furnace dimension 6mx5.5mx2.5m. The Max parts we could machine is 6.4 meters and we have capacity to assemble the pump over 1800mm and our cranes capacity is 30 tons.

EPT Machinery products include slurry pump, sewage pump, water pump, acid resistant or chemical pump, irrigation pumps, fire pumps and other products exported to over 90 countries all over the world. The application covers many fields, such as mining and mineral processing, dredger, tailings transportation, mining, steel, desulfurization pump, boiler feed water, construction, irrigation, water conservancy facilities, sewage treatment, drainage and water supply. 
 
In the era of rapid development of science and technology, EPT Machinery team take the entrepreneurial spirit “excellence and constant product quality, brand known worldwide and Credit-based”, business purpose “the achievements of create brand enterprise and industry pioneer”, to help you out and provide quality & cheap innovative products!

>>>FAQ
 
(1). Q: Are you a trading company or manufacture?
    A: EPT Machinery Co., Ltd is a real large professional manufacturer more than 32 years, in China, produce with our own factory.
 
(2). Q: what’s your factory workshops ?
    A: My factory produce include casting, mechanical process, lathe process, heat treatment, assembly, and test etc.
         Warmly welcome to visit & test my factory any time.
 
(3). Q: How about your QI series centrifugal end scution pump price?
    A: We are sure our price is factory price, and insist hig quality for our long term cooperation.
 
(4). Q: What is your QI series end suction pump material ?
    A: For the QI end suction pump, we could produce cast iron, cast steel, stainless steel, bronze, and material high CrMoNi alloy.
        And we could also produce as your requirements.
 
(5).Q: What kind of liquid can your QI series centrifugal end suction pump transfer?
    A: Liquid range: water, chemical liquid, hot water, sewage etc.
 
(6). Q:How does your factory do regarding quality control? 
    A:”Quality is priority. we always attach great importance to quality controlling from the very beginning to the very end.
         Our factory has 15~30 QC.
 
(7). Q: Is it easy for customers to change the parts by myselves ?
    A: yes, the structure is simple ,customers can change it very easliy. We will also supply you maintenance tools for free.
 
(8). Q: How about your gravel pump warranty?
    A: 1 year warranty for commplete setpump, 6-8 months for wet parts,  it depends on other pump working condition details.
 
(9). Q: How to do if the pump or parts have operatation problem within your warranty?
    A:  Tell me details timely, and show me pictures, we will send you pump solution at once without any hesistation.
 
(10). Q: Can you install the EPT motor or diesel engine with the pump for us ?
      A: yes, we can, it’s no problem, we are experienced in this .
 
(11): Q: .we don’t know which pump model we need ,can you help us ?
      A: yes, please tell me your detail requirements, include liquid, flow rate, head etc,
          my engineers team wiill calculate & select most suitable pump model for you, offer pump solution for you.
 
(12). Q:How long can you reply us if we send an inquiry ?
      A: Generall with in 2 hours, we will send you official quotation sheet, with price, EPT data, performance curve, dimension etc.
 
(13). Q: What are your advantages,why should I choose you?
    A:  Higher Quality, our parts have 30% longer life than the originals
         Short Delivery Time, for normal parts,we have stock in our warehouse
         Competitive Price, we can help you cut down the cost by 30% or more
        Best Services, we have technical department, quality control department and a professional sales team, we will offer professional service for you any time. 

 

ΞΞΞΞΞΞ CONTACT US ΞΞΞΞΞΞ

7x24Hours Online Contact Information

 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Good China in Santo Domingo Dominican Republic rubber coupling gearbox near me shop Price in Gujranwala Pakistan face gear coupling factory Centrifugal Sea Sand Pump with top quality lowest price

Mh China in Nice France bowex coupling shop Model in Yaounde Cameroon gear coupling supplier Electric Hoist Single Girder Gantry Crane 10 Ton with top quality lowest price

Mh China in Nice France bowex coupling shop Model in Yaounde Cameroon gear coupling supplier Electric Hoist Single Girder Gantry Crane 10 Ton with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

                     MH Model EPT Hoist Single Girder Gantry Crane 10 ton


MH Model EPT Hoist Single Beam Gantry Crane is used together with CD, EPT type EPT hoists. It is a track
travelling small and medium sized crane.

Normally, single girder gantry crane lifting capacity:0.5ton~32ton,lifting height:3m~30m,span: 3m~35m,working
temperature is -20-40 ºC.

Single girder gantry cranes include the models below:

  1. MH Model truss type gantry crane,
  2. MH Model box type gantry crane,
  3. M EPT Model EPT hoist hanging type gantry crane,
  4. MDG Model single girder gantry crane with hook (L type single girder gantry crane).

Gantry Crane Feature
    1. Crane material:Q235,Q345B/Q345D
    2. EPT box type, no-welding joint EPT box type, by machine hand, EPT and beautiful.
   3.  Wheels are vacuum casting by ourselves, intermediate frequency quenching.
   4. Wheels, wire rope, drum,gears,coupling are manufactured by our CNC machines.
   5.  HangZhou special or HangZhou Brand motor,top quality in China.
    6.  Electric equipment: Siemens or Schneider brand.
   7. Control method:Cabin control,wireless remote control or pendant control,you can choose two of them (According to
your demand to design the gantry crane.)

 

Technical Parameters of MH model Single Girder Gantry Crane
Items Unit specifications
Main Technical parameters Lifting capacity Ton 3ton, 5ton, 10ton, 16ton, 20ton, 32ton, etc
Span meter 6m~35m (based on your wokring requirement)
Lifting height meter 6m~12m (basing on your wokring requirement)
Main performance parameter Lifting speed m/min 3.5,7,8(Single speed);
3.5/0.35, 7/0.7,8/0.8(Double speed)
Cross traveling speed (hoist) m/min 10; 20; 30
Long traveling speed (crane) M/min 10; 20; 30
Safety Protection Overload protection Included
Up/down limit switch Included
Low voltage protection Included

1. Q: What’s your MOQ?

A: 1 Set;

2. Q: What’s your package?

A: Main body in plywood box or in plastic woven cloths; Spare parts in plywood boxes;

3. Q: What’s your delivery period?

A: Within 10/25/40 days after your prepayment received; exact period should be based on detailed requirements and

actual period;

4. Q: What’s your warranty period?

A: 12 months from winches accepted;

5. Q: Do you have engineer oversea installation service?

A: Yes; We have;

6. Q: What kinds of products do you have?

A: All kinds of industrial EPT winch (especially non-standard); Overhead Crane; Gantry Crane, EPT Hoist; Screw

Hoist; Radial/Flat Gate Hoist; Steel Gate; etc.

7. Q: Could we buy spare parts in local once they are out of work?

A: Our main EPT parts brand is Siemens or Schneider brand; it’s very easy to buy all the world. But if there is any

difficulty, we can post to you by express, such as DHL, UPS, FEDEX, Aramex, etc.

8. Q: Do you provide lift tools?

A: Yes, we can provide any kinds of lift tools such as lift sling belt, lift clamp, grab, magnet , pulley blocks, hook, lock
catch, wire rope, fiber rope, etc.

9. Q: Could your winches drag inclined?

A: Yeah, our EPT winches could drag horizontal, drag inclined, hoisting vertical.

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Mh China in Nice France bowex coupling shop Model in Yaounde Cameroon gear coupling supplier Electric Hoist Single Girder Gantry Crane 10 Ton with top quality lowest price

Marine China in Palermo Italy elecon gear coupling near me shop Engine in Sakarya Turkey nylon sleeve coupling price for Nta855-M Water Cooling with top quality lowest price

Marine China in Palermo Italy elecon gear coupling near me shop Engine in Sakarya Turkey nylon sleeve coupling price for Nta855-M Water Cooling with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Engine Model Cylinders Rated Output(KW) Aspiration
N855-M-195 6 145 Naturally Aspirated
N855-M-215 6 160 Naturally Aspirated
NT855-M-220 6 164 Turbocharged
NT855-M-240 6 149 Turbocharged
NT855-M-270 6 201 Turbocharged
NT855-M-300 6 224 Turbocharged
NT855-M-340 6 253 Turbocharged
NT855-M-360 6 269 Turbocharged
NTA855-M-350 6 261 Turbocharged & Intercooler
NTA855-M-380 6 283 Turbocharged & Intercooler
NTA855-M-400 6 298 Turbocharged & Intercooler
KT19-M-365 6 272 Turbocharged
KT19-M-380 6 283 Turbocharged
KT19-M-425 6 317 Turbocharged
KTA19-M-470 6 351 Turbocharged
KT19-M-510 6 380 Turbocharged
KTA19-M-500 6 373 Turbocharged&intercooler
KTA19-M-530 6 395 Turbocharged&intercooler
KTA19-M-550 6 410 Turbocharged&intercooler
KTA19-M3 6 477 Turbocharged&intercooler
KTA38 6 350 Turbocharged&intercooler
KTA38 6 780 Turbocharged&intercooler
KTA38-M0 6 559 Turbocharged&intercooler
KTA38-M1 6 671 Turbocharged&intercooler
KTA38 6 350 Turbocharged&intercooler
KTA38 6 582 Turbocharged&intercooler
KTA38 6 596 Turbocharged&intercooler
KTA38-M0 6 559 Turbocharged&intercooler
KTA38-M1 6 671 Turbocharged&intercooler
KTA38-M1 6 745 Turbocharged&intercooler
KTA38-M2 6 783 Turbocharged&intercooler
KTA38-M2 6 895 Turbocharged&intercooler
KTA38-M2 6 1007 Turbocharged&intercooler

Features & Benefits
* Felxible -can be customerized according to customer’s request, drawing will be submitted for approval. Such as taking off radiator and replacing with the heat exchanging system, total power solution such as gear box coupling and canopy design.

*Durability- With  engines have been engineered to meet the durability and performance needs of construcation applications and seawater cooling options and controls seamlessly integrated to ensure the propulsion for your vessel meets your needs.

* Long-Life Expectancy – these critical parts are manufactured by leading companies, other part comes from reliable manufacturers, these sets guarantee long functional life, outstanding performance, and high efficiency.

* Easy availability of the spare parts — the key parts are same as parts for vehicle diesel engine,better exchange and universality and durable.

* Easy maintenance -Diesel engine not require heavy maintenance. It is very easy, safe, and simple to use. Well-planned and preventive maintenance measures are generally available for these sets which are also low in cost

Company Profile
As a leading manufacturer and supplier in China, we are specialized in complete engine and spare parts. Such as crankshaft, camshaft, con rod, cylinder head, cylinder block, cylinder liner, piston, piston ring, engine valve, engine bearing, oil nozzle, oil seal, oil pump, fuel pump, water pump, turbocharger, and so on 
our products have exported many countrys .We are also the supplier for China DEUTZ/KHD,, ISUZU and LOVOL as well as MTU, KKK Germany
We also supply the china products which are made by joint venture with international engine and engine parts ,for example Elring, Bosch, Payen, Federal-mogul, TP, Holset, S.Valeo, Garrett, Borg-Warner, KKK, ZF, Eaton, Fuller, GKN, Thomson products which made in China under strict quality control and international quality standards.

We aim to be a top class supplier for worldwide OEM and aftermarket!     
hope build good business relationship with all company which is do business in this field 


Equipment test
Our company has high-speed precision punching machine,automatic mesh belt quenching furnace,automatic assembly line and other advanced equipment chain,as well as the industry’s most complete materials and chain EPT development and testing equipment,all aspects of the performance of all aspects of product testing,to meet the eligibility criteria before leaving the factory.Quality is our culture all the engine will be tested before leaving the factory we are proud to say that in our years of international trading experience,we never had a single order returned to us,For all ore clients,you will receive exactly what you ordered,and you will get it on time and we live by the principle that customer comes first.

Package
All warehouse staffs must be strict comply with the standard operating procedures for daily handing.The data of inbound & outbound must be clearly and accurately passed to the data team from inventory team timely.
The normal package is wooden box if export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.

Certificate
Our company specialized in diesel engine and spare parts more than 15 years and the products has passed ISO9001 and SGS international quality management system certification and be recognized to be high- EPT enterprises and High- EPT products.

Our Service
1) Quality is our culture — We are proud to say that in our years of international trading experience, we never had a single order returned to us.
2) Time is Gold — For all our clients, you will receive exactly what you ordered, and you will receive it on time
3)After sending, we will track the products for you once every two days, until you get the products. When you got the 
goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer 
the solve way for you
4) Super Value — We have much cost advantage. By choosing us, you can increase profit.
5) Great Services — We live by the principle that customer comes first.
6) Sample order is accepted.
7) Your choice make different !

FAQ
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, 
we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages 
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your EPT payment. The specific delivery time depends 
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and 
the courier cost.
Q7: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, 
no matter where they come from.
 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Marine China in Palermo Italy elecon gear coupling near me shop Engine in Sakarya Turkey nylon sleeve coupling price for Nta855-M Water Cooling with top quality lowest price

API China in Pereira Colombia gear coupling near me Oil in Kemerovo Russian Federation flender gear coupling supplier Adaptor Drain Valve for Oil Tank Truck Parts with top quality lowest price

API China in Pereira Colombia gear coupling near me Oil in Kemerovo Russian Federation flender gear coupling supplier Adaptor Drain Valve for Oil Tank Truck Parts with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Product description

 

Item name API Adaptor valve 
Item NO. GY-606
outer diameter 4″
Certification ISO9001:2008
worker temperature  -20°C-+70°C
Working pressure 0.6Mpa
Material Aluminum
Max. Flow Rate 2500 L/ Min

 
API Adaptor Valve

API Adaptor is installed at one side of the bottom of the tank, with quick coupling connection structure, as an important part of bottom loading system, it can realize no leakage when quick disconnection. It makes sure safety and reliable when loading and discharging, and can be used for petrol, gasoline, diesel and kerosene and some other light fuel.
 
Packaging & Shipping

Trade Information FOB,CIF,LC,CFR, EXW,
Payment term T/T, L/C, D/A, D/P, western union
Delivery time 10-30 working days according to order quantity
Package   Normally cartons can be as customers requirement
Shipment By sea, by air and by express

Feature

1. Hardening Treatment
The whole valve body is passed a special hardening process to improve its service life.

2. Second Gear Open
When do the handle open, there are two stalls to set the flow rate according to the customers’ demand.

3. Standardized Size
Interface dimension is designed according to the API RP1004 standard, docking with the standard API connector.

4. Light Weight
The main body is made of aluminum alloy, it is more light and sturdy.

5. Superior Process Performance
Reasonable design for the less pressure differences ensures the large input and output flow rate.

6. With the Sight Glass
Convenient to observe the inner working situation.

7. Foundation for Interlock Valve
When install the interlock valve, the API Adaptor can be controlled by air.
 
 
Our Servise
1. Your inquiry related to our products or prices will be replied within 24hours
2. Well-trained and experienced staffs to answer all your enquiries in fluent English.
3. Offering the support to solve the problem in the application or selling period.
4. Competitive prices based on same quality.
5. Guarantee samples quality same as mass production quality.
 
Our Promise
1. Welcome your 2D, 3D, and other drawings.
2. Not only manufacture mould, but aslo supply product.
3. IF you are interested in our products. please contact us at your any convenience .we’d like totell you more about our products.meantime,you only need to give us your requirements in detailfor your products.we can design and produce for you very well.
4. We warmly welcome your visit,as it is said to see is to believe if possible.
Company Information

FAQ
Q1: Are you a factory?
A:We are one of the leading China factory professional produce of fuel tanker parts, fuel nozzle, fuel dispenser and fuel station parts.Which covers 80,000me and with independent D&R ability, and we can offer OEM and ODM service.
Q2: What are the application fields of your products?
A: Desheng Petrol Machine mainly products including fuel tanker parts, fuel nozzle, fuel dispenser and fuel station parts etc.
Q3: What is your terms of packing?
A: We pack our goods in standard export carton box, other packing type can do as required.
Q4: How about your delivery time?
A: 5-7 days for samples; 20-35 days for batch goods after received payment.
Q5: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q6: What about the shipping package?
A: Package will use standard export carton, can do pallets as customized.
Q7: What is your sample policy?
A: We can supply the sample, but the customers have to pay the sample and freight.
Q8:How do you make our business long-term and good relationship?
A: We keep good quality and competitive price to ensure our customers benefit . We respect every customer and we sincerely do business with everyone

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

API China in Pereira Colombia gear coupling near me Oil in Kemerovo Russian Federation flender gear coupling supplier Adaptor Drain Valve for Oil Tank Truck Parts with top quality lowest price