Tag Archives: China shaft gear coupling

Volumetric China in Haifa Israel flexible gear near me Flowmeter in Vadodara India helical shaft coupling factory Roots Flow Meter for Natural Gas Coal Gas with top quality lowest price

Volumetric China in Haifa Israel flexible gear near me Flowmeter in Vadodara India helical shaft coupling factory Roots Flow Meter for Natural Gas Coal Gas with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Specifications and basic paramter

Specifications
 and made		  Nominal diameter
 DN(mm)		 flow upper
  limit
  (m3/h)		 Startup
flow rate
 (m3/h)		 Pressure
loss when
Qmax(Pa)		  Nominal pressure Accuracy
 class
  		   meter
coefficient		 Material
KKG-20 25 20 0.05 100 0.6 1.0,1.5 7633.37 Aluminumalloy
KKG-40 40 40 0.07 140 1.6 3892.31
KKG-60 50 60 0.1 100 1584.24
KKG-80 50 80 0.1 140 1584.24
KKG-200 80 160 0.12 180 479.837
KKG-450 100 450 0.1 200 231.35
KKG-1000 150 1000 0.76 450 61.899
KKG-1600 200 1600 1.15 500 50.2425

Other products

Product description

    KKG series gas waist wheel flowmeter is based on the principle of volumetric measurement to accurately measure the gas flow meter.The instrument has the characteristics of high precision, high reliability, wide range and high performance.This series of flowmeters are widely used in: city pipeline gas metering, industrial gas metering, gas regulator station metering, energy management and other non-corrosive gas metering live flow control and other occasions.Product performance up to the domestic advanced level.
    The intelligent gas waist wheel flowmeter is mainly composed of shell, conjugate rotor and intelligent flow integrator.A pair of conjugate rotors installed in the metering chamber maintain the correct relative position of the rotor through fine-machined adjusting gears under the action of the inlet and outlet pressure difference of the circulating gas ().Keep the best working clearance between rotor, between rotor and shell, between rotor and wallboard, realize the continuous non-contact seal.Each rotation of the rotor, the output of four times the effective volume of the metering chamber of gas,The rotor revolution is transmitted to the intelligent flow integrator through the magnetic seal coupling device and deceleration mechanism, so as to display the cumulative volume of the output gas.
     According to the principle of electromagnetic induction, using the weigen sensor from the synchronous rotation gear installed on the opposite magnetic steel magnetic induction flow volume flow proportional to the pulse signal,After amplification, filtering and shaping, the signal enters the micro-processing unit of the intelligent flow integrator together with the temperature and pressure sensor signals for calculation and processing, and displays the volume flow and total amount of gas directly on the LCD screen.The rotating shaft can also be displayed on the mechanical disk according to the magnetic drive through the gear set to form a mechanical count.

Product details

Production process

Product Size

Certifications

Features

1.Strict material selection of internal rotor, uniform density and special treatment,Strict material selection of internal rotor, uniform density and special treatment
2.The flow meter does not need straight pipe section before and after, can be installed in a narrow range, easy to use.
3.The lower starting flow , the widely range ratio , and the maximum range ratio is up to 1:300,suitable for a variety of operating conditions.
4.Pressure sensor, temperature sensor and flow sensor are all built in, making the structure more compact and less volume.
5.Using advanced microcomputer EPT and high-performance integrated chip,The machine has powerful functions and superior performance,The power consumption of the whole machine is low, which means that it can run with the built-in battery for a long time, and can also be transmitted to other devices through pulse signa outputl, 4~20mA output.And it has rs-485 communication function to transmit instrument information through wireless network, local area network and other means.
6.The integrator is designed with functions of lightning protection and surge prevention.And a multi – memory point backup function to protect user information safe and reliable.
7.Adopt special bearing for flow meter imported from Germany,Large screen display,multidisplay,Clear, and intuitive data,reading is convenient,Real-time display of temperature and pressure,Real-time measurement.
8.Electronic counting, mechanical counting and other methods can be selected ,Compliance with international standards.
9.Unexpected power failure, data permanent storage, prevent data loss.
10.Special structure is designed to prevent external magnetic and EPT interference from affecting metering.
Exhibition

Company information
Kunke has formed the radiation sales system and professional after-sales team to provid the full range of technical support and 24-hour uninterrupted point-to-point fast service for production installation, commissioning and online use, using only after-sales service information stystem, to achieve rapid response for the users and rapid processing market. Now our products have been sold to all provinces and autonomous regions and exported to South Korea, Russia, the United States, Indonesia and other countries.
Factory workshop

Client feedback

Packaging & Shipping


FAQ

Q: Are you trading company or manufacturer ?
A: We are factory.

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?
A: Payment=1000USD, 30% T/T in EPT ,balance before shippment.
If you have another question, pls feel free to contact us as below:

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Volumetric China in Haifa Israel flexible gear near me Flowmeter in Vadodara India helical shaft coupling factory Roots Flow Meter for Natural Gas Coal Gas with top quality lowest price

China China in Quito Ecuador gear tooth coupling shop Products in Zamboanga City Philippines sier bath coupling sales Suppliers. Factory Supply Chrome Plated Carbide Piston Rod Shaft with top quality lowest price

China China in Quito Ecuador gear tooth coupling shop Products in Zamboanga City Philippines sier bath coupling sales Suppliers. Factory Supply Chrome Plated Carbide Piston Rod Shaft with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

We specialized in precision parts and components machining to serve the electronics, automotive parts, astronautical parts, medical appliances and hand tool industries. And  widely range of design and manufacturing including custom cnc machining, cnc machined parts, non-standard machine parts, machined casting parts and precision turned parts that the materials of EPT parts are in steel, stainless steel, brass, aluminum and plastic.

Main products
1. Spline gear
2. Spline shaft
3. shaft coupling
4. Flange
5. Electromagnetic Brake
 

Part  name  Spline Shaft
Materials Available  1. Stainless Steel: SS304 , SS316,SS420
2. Carbon Steel:C45(K1045), C46(K1046)
3. Brass: C37700 ( HPb59)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 1214,1215
6. Aluminum: 6063 T5  6063T6   6061 T5/T6, 7075 T5 /T6
BORE Finished bore  , Pilot Bore, 
Surface Treatment High frequency treatment ,Hardness teeth,  integral heat treatment, blackening, Zinc-plated, Nickel-plated, anodized etc.
Precision grade AGMA ,JIN N8 Grade(JIS B1702-1:1998) , DIN
Processing Method CNC machining, Shaving m, Hobbing grinding, chamfering etc.
Size Customer Drawings & ISO standard 
Package Plastic Bags and Wooden Cases
Certificate IATF 16949:2016
Advantage Assured quality , Best services, Competitive prices, Fast delivery
Lead Time 5-10 Days for Samples;20-35 Days for Batch Goods

Company honor

Company equipment and environment

Production process

Packing and shipment

Our service
1. Prompt reply to your enquiry and quick quotations within 24 hrs.
2. Check your gears drawings very carefully and feedbacks with professional engineering questions on your designs.
3. All gears dimensions and tolerances will meet your drawings and remove all risks after your POs.
4. Punctual lead time and send you samples before bulk production.
5. Responsible for all defects or loss from the gears we produced.
 

FAQ
Q1:How to guarantee the Quality of Industrial Parts?
A1:we are IATF 16949:2016 certified firm.In 2004, we passed the ISO 9001:2000 quality system certification.In 2571,we passed the ISO 9001:2008 Quality System Certification of China Classification Society.we have the integrated system for industrial parts quality control. We have IQC (incoming quality control), IPQCS (in process quality control section), FQC (final quality control) and OQC (out-going quality control) to control each process of industrial parts prodution.

Q2:What’s the Advantage of Your Parts for Industry Products?
A2:Our advantage is the competitive prices, fast delivery and high quality. Our employees are responsible-oriented, friendly-oriented,and dilient-oriented. our Industrial parts products are featured by strict tolerance, smooth finish and long-life performance.

Q3:what are our machining equipmengts?
A3:Our machining equipments include CNC milling machines, CNC turning machines, stamping
machines,hobbing machines, automatic lathe machines, tapping machines, grinding machines,
screw machines, cutting machines and so on.

Q4: What shipping ways our use?
A4:Generally speaking, we will use UPS or D EPT to ship the products. Our customers can reach the
products within 3 days.If our customers do not need them urgently, we will also use Fedex and TNT.If the products are of heavy weight and large volumn, we will ship them by sea. This way can save our customers a lot of money.  

Q5:What materials can you handle?
A6:Brass,bronze,copper,stainless steel, steel,aluminum and titanium. 
 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

China China in Quito Ecuador gear tooth coupling shop Products in Zamboanga City Philippines sier bath coupling sales Suppliers. Factory Supply Chrome Plated Carbide Piston Rod Shaft with top quality lowest price

Rexroth China in Hyderabad Pakistan esco gear coupling sales Constant in Chicago United States helical shaft coupling supplier Pressure Pump A10V028dr Applied in Concrete Mobile Boom Pump with top quality lowest price

Rexroth China in Hyderabad Pakistan esco gear coupling sales Constant in Chicago United States helical shaft coupling supplier Pressure Pump A10V028dr Applied in Concrete Mobile Boom Pump with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Rexroth Constant Pressure Pump A10V571dr

Details

  • All-purpose medium pressure pump
  • Size 18 … 140
  • Nominal pressure 280 bar
  • Maximum pressure 350 bar
  • Open circuit

Features

  • Through drive for mounting of further pumps up to same nominal size
  • Low operating noise
  • Long service life
  • Short control response times
  • Excellent suction characteristics
  • 2 drain ports
  • Swashplate design

Technical data

Table of values

Size 18 28 45 71 88 100 140 45 71 100 140
Version Standard High speed
Displacement
geometric, per revolution		   Vg max cm³ 18 28 45 71 88 100 140 45 71 100 140
Nominal pressure   pnom bar 280 280 280 280 280 280 280 280 280 280 280
Maximum pressure   pmax bar 350 350 350 350 350 350 350 350 350 350 350
Maximum speed 1) at Vg max nnom rpm 3300 3000 2600 2200 2100 2000 1800 3000 2550 2300 2050
Flow at Vg max and nnom qV nom l/min 59 84 117 156 185 200 252 135 178 230 287
at Vg max and n = 1500 rpm qV 1500 l/min 27 42 68 107 132 150 210 68 107 150 210
Power at qV nom and pnom P kW 30 39 55 73 86 93 118 63 83 107 134
at qV 1500 and pnom P 1500 kW 12.6 20 32 50 62 70 98 32 50 70 98
Torque at Vg max and pnom M Nm 80 125 200 316 392 445 623 200 316 445 623
Weight (approx.)   m kg 12.9 18 23.5 35.2 35.2 49.5 65.4 23.5 35.2 49.5 65.4

*These values are valid at an absolute pressure of 1 bar in suction port S and for the optimum viscosity range νopt

In stock
A10VO series 31

Application:
Used in wheel loader, excavator, mobile pump truck, crane etc Heavy Equipment 

We, EPT group can provide full set of concrete pump spare parts: wear plate and cutting ring, s pipe, s valve assy, delivery cylinder, delivery piston, delivery pipe, elbow, taper bend, clamp coupling, rubber hose, filter element, seal kits, gear pump, water pump, remote control, hydraulic pumps etc.

>>>> Related spare parts

>>>> Other related equipment

>>>> Company Profile 

HangZhou EPT Material Co., Ltd, started business since 1991, and was formally established as a registered company in 2002, with 5.3million RMB registered capital.

Before 2015, EPT focused on the domestic market, and is a qualified supplier of Jianglu group and XEMC in the military and mechanical products.

In 2015, EPT set up the international marketing department, specializing in exporting concrete construction machinery, mining Roadheaders, and the related spare parts and accessories. With manufacturing bases in HangZhou, HangZhou and HangZhou cities.

EPT owns branches “Cahi “in Kiev Ukraine, and “Speedlane Trade Limited” overseas company. Mainly export to Pakistan, Ukraine, Russia, and other EU countries and Southeast Asian countries under our own brands “Speedlane” and ” XIHU (WEST LAKE) DIS.NG”.

EPT has got the CE certificate, and Ukraine’s Coal Mining Safety certificate and permission. Cooperated with Ukraine largest energy company, DTEK group, the world top 500, and established a long term and friendly partnership.

Xihu (West Lake) Dis.ng’s enterprise value: Striving, Loyalty, Honesty and Altruism;

Xihu (West Lake) Dis.ng’s work concept: Tomorrow never comes; Never slug; Deliver positive energy!

Xihu (West Lake) Dis.ng’s mission:

One Stop Shop in engineering construction machinery;

China Machinery, Global Services!

>>>> Certification

>>>> Payment & Transportation 

>>>> FAQ

>>>> Exhibition & Customer Show

 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Rexroth China in Hyderabad Pakistan esco gear coupling sales Constant in Chicago United States helical shaft coupling supplier Pressure Pump A10V028dr Applied in Concrete Mobile Boom Pump with top quality lowest price

High China in Rio de Janeiro Brazil gear coupling 105 sales Precision in Hamadan Iran (Islamic Republic of) seisa gear coupling supplier Hardened Linear Bearing Shaft 50mm 60mm 80mm with top quality lowest price

High China in Rio de Janeiro Brazil gear coupling 105 sales Precision in Hamadan Iran (Islamic Republic of) seisa gear coupling supplier Hardened Linear Bearing Shaft 50mm 60mm 80mm with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Product Description
EPT High Precision Custom Shaft
The shaft is a kind of mechanical transmission, which transmits mechanical torque. There is a longitudinal keyway on the outer surface of the shaft, and the rotating member sleeved on the shaft also has a corresponding keyway, which can keep rotating synchronously with the shaft. While rotating, some can also slide longitudinally on the shaft, such as gearbox shifting gears.

We can make customers’ satisfactory products according to the samples or drawings provided by customers. For the completion of a product, we also need to know its material, heat treatment requirements and surface treatment requirements. We are a factory with 40 years of manufacturing experience, welcome to consult.

The advantage of our shaft
1 High carrying capacity
2 Good orientation
3 Small stress concentration
4 Convenient processing, high precision with grinding method
5 High strength and long life

     

       

EPT Manufacturing Co., Ltd. is a specialized supplier of a full range of motor shafts, gears, Flanges(Couplings), gear racks, sprockets, pulley, machined parts and so on.

Due to our sincerity in offering best service to our clients, understanding of your needs and overriding sense of responsibility toward filling ordering requirements, we have obtained the EPT of buyers worldwide. Having accumulated precious experience in cooperating with foreign customers, our products are selling well in the American, European, South American and Asian markets.Our products are manufactured by modern computerized machinery and equipment. Meanwhile, our products are manufactured according to high quality standards, and complying with the international advanced standard criteria.

With many years’ experience in this line, we will be trusted by our advantages in competitive price, one-time delivery, prompt response, on-hand engineering support and good after-sales services.

Additionally, we also can design and make non-standard products to meet customers’ special requirements. Quality and credit are the bases that make a corporation alive. We will provide best services and high quality products with all sincerity. If you need any information or samples, please contact us and you will have our soon reply.

FAQ
1)Are you trading company or manufacturer?
We are factory.
 
2)How can I customize my products?
Attach your drawing with details(surface treatment,material,quantity and special requirements etc.)
 
3)How long can I get the quotation?
We will give you the quotation within 48 hours(considering the time difference)
 
4)How long will you produce the parts?
Generally it is 5-10 days if the goods are in stock. Or it is 15-25 days if the goods are not in stock, it’s according to quantity.
 
5)Do you provide samples? Is it free or extra?
Yes, we could offer the sample, the samples and shipping costs need to be borne by the client.
 
6)What is your terms of payment?
Payment≤1000 USD, 100% in advance. Payment≥1000 USD, 30% T/T in advance, balance before shipment. If you have any questions, please don’t hesitate to contact us.
 
7)What if the products we received are not good?
Contact us without hesitation, our special after-sales service will take the responsibility.
 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

High China in Rio de Janeiro Brazil gear coupling 105 sales Precision in Hamadan Iran (Islamic Republic of) seisa gear coupling supplier Hardened Linear Bearing Shaft 50mm 60mm 80mm with top quality lowest price

Taper China in Bangalore India floating shaft gear coupling near me Lock in Panipat India gear coupling 105 price Bush 1610 with top quality lowest price

Taper China in Bangalore India floating shaft gear coupling near me Lock in Panipat India gear coupling 105 price Bush 1610 with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Taper lock bush 1610
1. Material: C45 steel, steel, iron cast
2. Standard: Standard or non standard taper bushing, made according to ISO, DIN, ANSI, JIS, BS standard
3. Installation is quick and easy without special tools
4. Taper bush cannot be bored larger than largest bore listed
5. Types: 1008, 1108, 1210, 1610, 1615, 2012, 2517, 3571, 3030, 3525, 3535, 4030, 4040, 4535, 4545, 5040, and 5050
We professionally export different kinds of transmission components, such as standard sprockets, taper lock sprockets, special sprockets, motorcycle sprocket, chain couplings, shafts, gears, box gears, roller chain, agriculture chain, leaf chain, conveyor chain, oliver chain, special chain, pulleys, taper bushes and racks. All our products are produced strictly as per ISO9001 quality standard and exported to more than 50 countries. We have adopted advanced CAD and CAM methods for design and advanced heat treatment craft.
More than 20 years advanced EPT and experience of us will give EPT support for the taper bush you need. We will understand your need of product quickly, and give quick respond and good service. A lot of cases of our products will show you that it EPT your trust.
Under the full quality control system, our products go through the precise product line and strict testing process. We have excellent working flow and standard to ensure stability, products reliable enough for using.
Take our scale economy, raw material superiority, and sincerity for clients to account, our price has a great competitiveness. They are good value and cost effective than your imagine.
We sincerely hope establishing long and friendly business relations with clients from all over the world. Our goal is not just providing product, but also providing a complete solution including product design, tooling, fabrication and service for our customers to achieve their upmost satisfaction.

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Taper China in Bangalore India floating shaft gear coupling near me Lock in Panipat India gear coupling 105 price Bush 1610 with top quality lowest price

70m3 China in Ahmedabad India dodge gear coupling factory Cement in Banjarmas in Indonesia gear shaft coupling shop Powder Tank Semi Trailer with top quality lowest price

70m3 China in Ahmedabad India dodge gear coupling factory Cement in Banjarmas in Indonesia gear shaft coupling shop Powder Tank Semi Trailer with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

All CIMC vehicles are customizable, welcome inquiry!!!

Type: Air Discharge Tanker For Carrying Cement
MODEL: CIMC9402GSN
DIMENSION:
Overall Length : 10,625 mm
Overall Width : 2,500 mm
Overall Height : 3,990 mm
Landing Leg Setting : 2,420 mm
Wheelspan : 5650mm
Axle Spacing : 1,310 mm
King Pin Plate Height : 1425mm
TANK:
Tank Volume : 42,000 L(50.4ton)
Tank shell :   carbon steel, t=3.5mm/t=4mm thickness 
Dished ends : 4.5mm thickness
Pipe material : Carbon steel
Discharging Hose Diameter : 4″
Discharging valve 4″ butterfly valve
Discharging Hose Length : 7,000 mm
Hose quick coupling : 4″ female quick coupling.
Fluidizer :  Aeration pad with air bag.
Discharging capacity : 1m3/min
Working pressure : 0.2 Mpa
Test pressure : 0.3 Mpa
Manhole : Two.
MAX. Horizontal Discharging Distance: 5,000 mm
MAX. Vertical Discharging Distance : 15,000 mm
 
RUNNING GEAR:
Suspension : Undermount tri-axle suspension with equalizer;
7-Leaf Spring.
Axle : FUWA Square axle,13T capacity,3 pcs.
Brake : Dual line pneumatic brake system without ABS.
Parking Brake : Type 30/30 spring brake system on each axle.
Wheel : 9.0-22.5,10 holes steel Disc wheel, 12pcs. Made in china
Tire : 12R22.5,  12pcs,  tubeless tyre, made in china 
King Pin : 3.5″ welding type.
LXIHU (WEST LAKE) DIS. LEG: Two speed manual operation type with sand shoe.
Lifting Capacity : 25,000 kg
Static Load Capacity : 80,000 kg
 
PNEUMATIC SYSTEM:
Electromotor : Huafeng ZHBP1 24V,  Made in China
Air Compressor : 10m3/min Made in China
Mounted at the front of trailer,
ELECTRICAL:
Voltage : 24 Volt.
Receptacle : 7 way
Light: Front Marker Lamp : White
Side Marker Lamp : Amber
Rear Lamp : Red
Turn Signal Lamp : Amber
 
STRUCTURAL WEIGHT RATING:
Tare Weight : 9,300 Kg.
Pay Load :50,400 Kg.
G.V.W.R. : 59,700 Kg.
PAINTING:
The tanker’s color is as per your requirement.
The side guard is red and white.
Contact                                                                        
Mr. Allen
Mobile : +86 151 5082 2016

35M3 cement tank semi trailer
General Description  
Vehicle Name  Bulk Powder/Cement Tank Semi-trailer
Vehicle Brand  CIMC
Vehicle Model CIMC9390GSN
Overall Dimension(mm) 1571,9800x2500x3995
Gross Weight(kg) 38900
Rated Payload(kg) 27500
Curb Weight(kg) 11400
Fifth Wheel Load Approx.(kg) 16000
Running Gear
Axle  3x13tons FUWA axle,Brand can be choosed
Wheelbase(mm) 5520+1310+1310
Landing Legs BAOHUA landing leg,Brand can be choosed
King Pin BAOHUA 2inch or 3.5inch,Brand can be choosed
Tyre No. 12
Tyre Specification 11.00R22.5 16PR/11.00R20 12PR,11.00-20 12PR,12R22.5 12PR
Spring Leaf No. /10/10/10
Axle Load(kg) -/24000(parallel installed)
Electric System  
24V electric system, electrical socket for lighting,rear lamp for parking, direction,fog,
reverse and 4 side lights.
Tank Body  
Tank Shape cylindrical
Total Volume 58,000ltrs~60,000ltrs
Tank Material Hight quality carbon steel,4mm
Tank Thickness 4mm
Suspension type Common mechanical
Compartments Compartment optional.(standard only one)
Manhole Internal Clasping Type or A Shape External Pressing Type
Necessary Accessories Top access ladder,anti-slip walkway and foldable handrail,
spare wheel carrier,discharge hose, reflective stickers
Air Compressor
Brand  Chinese famous brand
Discharge Speed 1.0~1.3tons/min
Discharge Height >25M
Diesel Engine
Brand WeiChai

Company information
CIMC VEHICLES SALES CO., LTD.

CIMC VECHICLE was founded by CIMC group, which fixes the mission to be customers’ partner for modern transportation. CIMC is dedicated to manufacturing and supplying CIMC trucks, CIMC truck body assembly, trailers, tank equipment. Currently, CIMC owns USD 8.8 billion total assets, USD 2.6 billion net assets, USD 8.4 billion annual sales and USD 0.6 billion net profits in 2571, having over 150 subsidiaries and 63, 000 staff across China, North America, Europe, Asia and Australia.

Vehicles: CIMC has over 1000 lines of products in 11 series, including container chassis, flatbed trailer, bulk lorry, tanker, self-dumper, reefer trailer, van, curtain side trailer, mixer, pump truck, car carrier vehicle, fire engine, sanitation vehicle, etc. With the annual output capacity of over 200 thousand units, it now takes the leading position in the world. Up to today, the Group has established 22 production bases.

Heavy Truck: Have its own production C & C brand truck. Other heavy truck CIMC produces the truck body, more than 2, 000 kinds of truck body for different transportation purpose. The truck chassis cooperates with FAW, XIHU (WEST LAKE) DIS.FENG DFAC, SHACMAN, SINOTRUK, FOTON, BEI BEN, JAC, CAMC, SI CHUAN HYUNDAI, SAIC-Iveco and so on, include all truck chassis brand production in China.

Welcome global heavy truck dealer to take a sight seeing of trucks, to taste values of “considerate service, benefits share”! Will bring you cost-saving solutions and eye-catching returns!

Contact information
CIMC VEHICLES SALES CO., LTD.
Address: 8floor, Cimc Plaza, No. 10 West HangZhou Rd, HangZhou, ZheJiang , China
Website:yzcimc.en.made-in-china.com
www.cimc-vehicles.com
Tel:86 – 514 – 8282 6119
Fax: 0086-571-88220971:86 -514-8732 5750
Cell :86-151-5082-2016 (Mr.Allen)
 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

70m3 China in Ahmedabad India dodge gear coupling factory Cement in Banjarmas in Indonesia gear shaft coupling shop Powder Tank Semi Trailer with top quality lowest price

Cycloidal China in Chennai India floating shaft gear coupling price Gearbox with top quality lowest price

Cycloidal China in Chennai India floating shaft gear coupling price Gearbox with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

BWD and BLD series Cycloidal gear reducers

BWD and BLD series flange gear reducers are based on the building block design, so its convenient for them to fit all types of motors or to connect with other power input, and its possible for different types of machines to combine or connect.
1,Compact construction, saves space for mounting, large load-bearing capacity and long life.
2,High transmission efficiency and low noise. A single machine can reach a transmission efficiency
as much as 96%.
3, Precise division of transmission ratio with a wide range. The combination of machines can produce
a larger transmission ratio at a low output rotational speed.
4,Installation: Foot-mounted, B5/B14 flange-mounted, input shaft, hollow output shaft, etc.
5,Integrated casting housing, compact dimension, high loading support, stable transmitting and low noise level
 

    

Product Name BWD, BLD Series Flange Mounted Pinwheel Cycloid flange Gearbox with Explosion-proof motor
 Gear Material  20CrMnTi
 Case Material  HT250
 Shaft Material  20CrMnTi
 Gear Processing  Grinding finish by HOFLER Grinding Machines
 Color  Customized
Noise Test   65~70dB
 Efficiency  94%~98% (depends on the transmission stage)
 Lubricating oil Shell Omala synthetic oil or mineral oil , or similar brand 
 Heat treatment  tempering, cementiting, quenching,etc.
Brand of bearings C&U bearing, ZWZ,LYC, HRB, SKF,NSK and so on
Brand of oil seal NAK or other brand
Temp. rise (MAX) 40 °
Temp. rise(Oil)(MAX) 50 °
Vibration ≤20µm

Characteristics:
1.Cycloid reducer big reduction ratio, high efficiency: a reduction gear ratio is 9~87, the two-stage reduction gear ratio is 121 ~ 5133, multistage combination can reach tens of thousands, and the needle tooth meshing line type rolling friction, the meshing surface no relative sliding, so a reduction efficiency of 94%.
2.Pin wheel reducer smooth running, low noise: the teeth contact at the same time when in operation, the coincidence degree high, stable running, EPT overload capacity, low vibration and noise, a variety of models, small noise.
3. The use of reliable, long life: because the main part is made of high carbon alloy steel quenching (HRC58-62), and then grinding, and cycloid gear and pin gear set mesh transfer to the pin gear form rolling friction pair, friction coefficient is small, so that the meshing zone no relative sliding, wear small, so durable.
4. Compact structure, small volume: compared with other reducer with the power of the above weight, small volume 1/3, as is the planetary transmission, the input shaft and the output shaft in the same axis, in order to obtain the smallest possible size.

Main Features

All planetary cycloidal reducer rotating device can be divided into three parts: input part, deceleration part and output part.
Dislocation on the input shaft is equipped with a 180ºC of double eccentric sleeve, equipped with two ball bearings on the eccentric sleeve, The formation of H two cycloid gear center hole is the eccentric sleeve on the turning arm bearing raceway, and by a groud of cycloid gear and pin gear ring of gear meshing, less bad tooth meshing reduction mechanism to form,(in order to reduce friction, in small ratio of speed reducer, the needle with needle teeth on the gear set).
When the input shaft with eccentric sleeve rotates with an eccentric sleeve,as a result of the cycloid gear tooth profile curve characteristics and restricted by needle on the gear teeth,the movement of the cycloid gear becoming both revolution and rotation of the plane movement,and And the input shaft makes one rotation, and the eccentric sleeve also rotates one rotation.,cycloid gear in the opposite direction around a big tooth difference reduction is obtained, then with the help output mechanism,the cycloid gear rotates at low speed movement through the pin shaft,passed to the output shaft,low output speed can be achieved.

NMRV Worm Speed Gear Reducer
NRV Worm Speed Gear Reducer
Stainless Steel Worm Reducer
Low Backlash Worm Reducer and Zero Backlash Servo Gearbox
Worm Gear Box For Solar Tracking System
Worm Reducer For Dried Powder Press
Worm Gear Reducers For Hoists
Worm Gear Reducers For Winch
STAINLESS STEEL WORM REDUCERS
Servo Worm Gearboxes
 

Worm Reducer For Paper Cutting Machine
Worm Reducer For Continuous Casting Machine Of Foundry
Cast Iron Worm Reducers
Stainless Steel Worm Speed Reducer
Worm Gear Reducers For Automatic Car Washing Machines Drive
Worm Gearbox Reducers For The Biomass Boiler Sector

Worm Gear Drive Screw Actuator
Worm Reducer For Construction Hoist
Worm Reducer For Rubber Tire Curing Press
Worm Reducer For Pipe Welding Machine

Worm Gear Slew Drive
Arc Gear Cylindrical Worm Gearbox
Motor Worm Gearboxes Gw10 With Chain Coupling For Greenhouse
Motor Worm Gearboxes Gw150s Chain Coupling For Screening Systems
etc…
For more type of gearboxes, please send us inquiry!

 

 

 
 
Our Company
Ever-power Group specialist in making all kinds of mechanical transmission and hydraulic transmission like: planetary gearboxes, worm reducers, in-line helical gear speed reducers, parallel shaft helical gear reducers, helical bevel reducers, helical worm gear reducers, agricultural gearboxes, tractor gearboxes, auto gearboxes, pto shafts, special reducer & related gear components and other related products, sprockets, hydraulic system, vacuum pumps, fluid coupling, gear racks, chains, timing pulleys, udl speed variators, v pulleys, hydraulic cylinder, gear pumps, screw air compressors, shaft collars low backlash worm reducers and so on. furthermore, we can produce EPT variators, geared motors, EPT motors and other hydraulic products according to customers’ drawings.
We provides a reliable grantee for the product’ s quality by advanced inspection and testing equipment. professional technical team, exquisite processing EPT and strict control system. 
In recent years, the company has been developing rapidly by its rich experience in production, advanced management system, standardized management system, EPT technical force. We always adhere the concept of survival by quality, and development by innovation in science and technology. 
Our Group is willing to work with you hand in hand and create brilliance together! 

Material available

Low carbon steel, C45, 20CrMnTi, 42CrMo, 40Cr, stainless steel. Can be adapted regarding customer requirements.

Surface treatment

Blacking, galvanization, chroming, electrophoresis, color painting, …

 

Heat treatment

High frequency quenching heat treatment, hardened teeth, carbonizing, nitride, …
 
Certifications

FAQ:
 

Q: Are you trading company or manufacturer ?

A: Our group consists in 3 factories and 2 abroad sales corporations.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in EPT ,balance before shippment.

Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.

If you have another question, please feel free to contact us.
Packing & Delivery
Services
Also I would like to take this opportunity to give a brief introduction of our Ever-Power company:

Our company is a famous manufacturer of agriculture gearbox,worm reduce gearbox, PTO shafts, Sprockets ,rollar chains, bevel gear, pulleys and racks in china.

We have exported many products to our customers all over the world, we have long-time experience and EPT EPT support. 

Some of our customer :
Italy: COMER,GB GEABOX ,SATI, CHIARAVALLI, AMA , Brevini
Germany: SILOKING ,GKN ,KTS
France: Itfran, Sedies
Brazil: AEMCO ,STU 
USA: John Deere , BLOUNT, Weasler, Agco, Omni Gear, WOODS
Canada: JAY-LOR , CANIMEX ,RingBall
……

-Ø Our Company with over twelve year’s history and 1000 workers and 20 sales.
-Ø With over 100 Million USD sales in 2017
-Ø With EPT machinery equipments
-Ø With large work capacity and high quality control, ISO certified.
……

You also can check our website to know for more details, if you need our products catalogue, please contact with us.

 

 

 

                                                               

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Cycloidal China in Chennai India floating shaft gear coupling price Gearbox with top quality lowest price

Production China in Asmara Eritrea flexible gear coupling shop Animal in Faisalabad Pakistan helical flexible shaft coupling supplier Poultry Livestock Cattle Chicken Pig Feed Pellet Press with top quality lowest price

Production China in Asmara Eritrea flexible gear coupling shop Animal in Faisalabad Pakistan helical flexible shaft coupling supplier Poultry Livestock Cattle Chicken Pig Feed Pellet Press with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Animal Feed Production Line
 
The feed production line plays for feed industry to produce pellet or powder feed for aqua, livestock and poultry. We are manufacturing animal feed making machine, for example, Chicken feed making machine, pig feed making machine, cattle feed making machine, fish feed making machine, poultry feed making machine for exportation.
Poultry Feed Pellet Plant

Features

1.Widely applied product with mature EPT .

2.The main driving adopts high-precision gear drive, so that the output is improved by about 20% when compared with that of belt drive.

3.Imported high-quality bearing and oil seal are adopted to ensure efficient, stable and low-noise whole machine operation . the granulating room is equipped with air suction temperature reducing system .

4.The feeder adopts variable-frequency and variable-speed motor to ensure the quality of discharged particles .

5.Ring dies with multiple kinds of bore diameters are optional . and high-quality craft ring dies are adopted, so that the service life is long. The discharged particles are smooth and the quality is high .

6.International advanced compensation type snakelike spring coupling has the propertied of novel and compact structure, high safety, low noise and low fault rate.

7.Plus-size conditioner and jacket type conditioner are selectable to strength the particle conditioning effect.

 
Technical Parameters:
 

Model SZLH320 SZLH350 SZLH400 SZLH420 SZLH508
Capacity 2-5T/H 1.5-8T/H 2-10T/H 3-12T/H 4-20T/H
Main Motor Power 37KW 55KW 75/90KW 110KW 132/160KW
Screw Feeder Power 0.55KW 0.75KW 0.75KW 1.5KW 1.5KW
Conditioner Power 2.2KW 2.2KW    2.2KW 5.5KW 7.5KW
Ring die inner diameter 320mm 350mm 400mm 420mm 508mm
Ring die rotational speed 305PRM 336PRM 307PRM 287PRM 287PRM
Roller outer diameter 140mm    165mm 190mm 206mm  /
Dimension 2300*1000*2100 3200*1100*1700 3200*1300*1900 3500*1300*2800 3500*1500*2900

Commercial Poultry Chicken Feed/Food Pellet  Mill  Photos:

Final Product Photo:


 

About Service

We insist on “Quality is the soul of company” and take customers as our god, owned outstanding R&D team with the sense of innovation and cooperation, timely and effectively after-sales service team, professional installation guidance team. We devote to all-round service of all the products from shipment to maintenance.

√  Our professional service includes: Free training, Guidance Installation and Debugging.

√  Guaranteed Time: 12 moths from delivery date .

If you have any question, please contact us freely. Our after-sales service team on-line will do the best to accomplish your sincere requirement on time.

Thank you for your reliance and support!

Packing & Delivery

Why choose from us?

A.Good reputation

Because of the good quality and credit,our company are with good reputation both at home and abroad.

B.Factory direct supply

This ensure the competitive price available and brand care.

C.Advanced technology adopted

American CPM advanced technology with rich experience on site for installation and debugging,which has the good ability to provide with aftersale service.

D.Best and reasonable structure design of the pellet mill

This make sure the durability of the machinery running.
Gear drive of the pellet mill which make the pellet machine stronger for making the wood pellets.Compared with belt drive,with lower consumption for the same capacity.

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Production China in Asmara Eritrea flexible gear coupling shop Animal in Faisalabad Pakistan helical flexible shaft coupling supplier Poultry Livestock Cattle Chicken Pig Feed Pellet Press with top quality lowest price

Sauer China in Davao City Philippines gear grip flexible shaft couplings supplier Mf500 in Fukuoka Japan motor and gearbox coupling factory Hydraulic Spare Parts Manufacturers Direct Sales with top quality lowest price

Sauer China in Davao City Philippines gear grip flexible shaft couplings supplier Mf500 in Fukuoka Japan motor and gearbox coupling factory Hydraulic Spare Parts Manufacturers Direct Sales with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

 

This table lists the company’s sale of most of products.
Series/Part no. Description
(1)  Rexroth / Uchida Rexroth A2FO/A2FM/A2FE10-250, A2F12-500, A2VK5-55MA, A6V28-250, A7/8V28-500, A8V80-107  
  A6VM/A7VO28-500, Uchida A8VO55-200  
  A4VSO40-500, A4V40-250, A4VG28-250,  A10VSO18-140,  A10VG28-63  
  Uchida AP2D12-38,  A10V/VD/E40-43, Rexroth A11VG50,  A11VO40-260, A20VLO260  
   
(2)  Vickers PVB/MPVB5-110, PVQ10-32, MFB5-29,  PVE19-21,  PVH45-141, PVD45, PVM571,
  PVXS130-250
(3)  Eaton 3321,  3932,  4621,  5421,  6423,  7621, 78462  
(4)  Sauer Sundstrand SPV14-18, PV20-27, MPV046, PV90R30-250  
(5)  Caterpillar VRD63, AP12-14, 320C, SPK10/10, SPV10/10  
  E200B new, 12G, 14G, 215, 245, 330B, PSV450, 992/963  
(6)  Liebherr LPVD45 / 64 / 90 / 100 / 125 / 140 / 250 / 260  
(7)  Linde HPR75/100/130/160, B2PV35-140, BMF50-105, BPV35-70, BMV75.27, BPR140/186/260  
(8)  Parker / Volvo F11-005 / 571 / 150 / 250,  F12-060 / 080 / 110  
(9)  Kawasaki / Teijin Main pumps: K3SP36C, K3V63-280, K5V80-200, NV64-270, NX15, NVK45, KVC925-932  
  Swing motors: M2X63-210, M5X130-180, MX150-500  
  Travel motors: MAG150-170, GM05/06VL, GM05/07VA, GM08-23/30H/35VA/35VL/38VB, DNB08  
(10)  Komatsu Main pumps: HPV35/55/90/95/132/160, PC40-8, PC60-7, PC100/200/300/360/400  
  Swing motors: PC45R-8, 60-6/7, KMF40-105, KYB33-87, PC200-6/7, 300, 400, 650  
  Travel motors: HPV105  
(11)  Hitachi Main pumps: HPV091 / 102 / 116 / 125B / 145  
  Swing motors: EX120-2/5  
  Travel motors: HMGC32 / 35, HMGE36, EX550-3  
(12)  Toshiba Swing motors: SG02 / 571 / 04 / 08 / 12 / 571, PVC90R, PV090  
(13)  Kayaba / Sumitomo MSG-27P/44P, MSF-85, MAG-33VP, JMV-53/34, PSVD2-21E/26E, PSV2-55T, 280  
(14)  Kobelco Travel motors: SK200-1/3/6, SK220-2/3 (MA340), SK320 & SK430  
(15)  Nachi PVD-2B-32L / 34 / 34L / 36L/38/40/42, PVK2B-505, YC35-6  
(16)  Kato Travel motors: HD400 / HD450V-2 / HD1571 / HD3000  
(17)  Tokiwa MKV23 / MKV33
(18)  Bobcat 331 & 337
(19)  Hawe V30D95-250, V60N
(20)  Tadano Tadano 100, 150
(21)  Denison PV29-74
(22)  Parker Parker BMHQ30/PV092/140/180  
Rotary group parts for hudraulic piston pump,meet with special market,
advanced technology,perfect design,top quality Good factory price  

Our company can supply a large number of  piston pump (motor) accessories, Specific models are as follows:

 We sell the  hydraulic piston pump (motor) which currently has more than 1185 kinds of varieties and reducer assembly parts varieties has more than 12367 kinds of (including plunger sliding boots, cylinder, oil distribution plate, swing, variable piston, drive shaft, skeleton oil seal, gear pump, rod, pressure plate, central shaft, spindle, inclined plate, the ball hinge spring, ball joint, back plate, the thrust plate, friction plate, separator, oil distribution disc plug, bushing spring and other parts).We believe there is always a product that you will need.

Product Description:

 

More brands of pumps parts:

EPT EXCAVATOR SERIES:
HPV35 (PC60); HPV55 (PC120); HPV90 (PC200-3); HPV90 (PC200-5); PHV95 (PC200-6, PC120-6 in addition to the pump shaft). HPV132 (PC300-7, PC400-6); HPV160 (PC300/400-3/5); HPV135; PC30UU; PC40-8 main pump; PC50 (PC55/56); PC60-7 main pump (HPV75); PC160; PC200-2 (main pump); PC200-8 main pump/PC240-8 main pump; PC320; PC360-7 main pump (PC300-7); PC400-7 main pump; PC1250 main pump; PC45R-8 rotation; PC60-6 rotation; PC60-7 rotary; PC120-6 rotation; PC200 – six rotary/LMF45; PC200-7 rotary motor; PC450 rotation; PC300-6 rotation; PC200-7 walk; PC400-7 walk; HPV220-8 rotation; PC650 rotary.

 

CAT SERIES:
VRD63 (CAT120) double pump; SBS80 (CAT312C) main pump; E200B (new) double pump; AP – 12 double pump; AP-14 (CAT325C); CAT320C double pump; SPK10/10 (E200B) double pump; SPV10/10 (MS180) double pump; CAT12G; CAT14G / 16 g; CAT215; CAT245; Walking CAT330B motor; Walking PSV450 (AP-12); CAT992; CAT330C walk; CAT385H.

 

KYB SERIES:
PSVD2-16 e (1.6 2 tons of sunvo intelligent); PSVD2-21 c (KYB); PSVD2-21 e (KYB) 4 t/SVD22 little dig primary pump; 27 PSVD2-26 e/e (KYB); KYB – 25 cc (45 ishikawa island, long yasuda K040 / K045); Ishikawa island 60; PSVL-54 (yasuda KYB long 6 tons of 155 drivers); PSVK2-25; KMF40; KMF40-2; KMF90 (KPV90) PC200-1/2/3 (rotary, walking); KMF105; KYB33; KYB36; KYB37; KYB87; KYB90 (MSG – 60 p); MSG – 27 p (KYB)/LSGMF27/10 w; MSG-44 p (KYB)/LSGM44/10 w-R21; MAG-vp-480-e-2 (4-5.5 tons of small excavators walking motor); MSF-85 (instead of ZF motor); PSV2 sumitomo 120-55 t (KYB); Sumitomo 280 rotary; V25..

NACHI SERIES:
PVD-2-b-32 l; PVD-2-b-34 walk; PVD-2-b-34 l (small dig primary pump); PVD 38/40-2-36 b/l; PVD-2-b-42; PVD -2-b-63; PVD45; Nachi 130; PVK-2-b-505 (ZAX55 main pump); YC35-6 yuchai little dig a rotary motor; YC35-6 yuchai little dig walking motor; PCLS 18-200-b (yuchai 55 rotary); The bobcats 331 drivers (rotary); The bobcats 337 walking (motor).

TOSHIBA SERIES:
SG02; SG571 (MFB40); SG04 (MFB80); SG08 (MFB160); SG12; SG20 (MFB250); PVB92 (PVC90RC08 / PVC70R) (8.5 tons of drivers Toshiba 8 tons, yuchai); PV090; PV092 (PV080 gm); PSVS – 90.

JIC SERIES:
JMV-44/22; JMV-53/34 (6 to 8 tons of small excavator walking motor); JMF-64; JMV147/95; JMF-151-VBR (22 sm1510117); JMF-155.

LIEBHERR SERIES:
LPVD45; LPVD64; LPVD75; LPVD90; LPVD100; The new LPVD100 (914); LPVD125; The new LPVD125; LPVD140; LPVD250; LPVD260.

KOBELCO/KATO SERIES:
SK250-8 main pump; SK200 – a third walking motor; SK220-3 (MA340 walking motor); SK200-6 walking motor; SK200-6 new walking; Walking SK320 motor; M3V150 (SK220-2) walking motor; Walking SK430 motor; Kato 400 drivers motor; HD450V – 2 (kato); HD3000; DH55 55 drivers rotary motor (daewoo); T3X128 / daewoo 300-7 rotary; Daewoo walk 225-7; Daewoo DH370 rotation; Modern 60-7 rotary motor; Modern 480 rotary motor.

KAWASAKI SERIES:
K3SP36C (SDV36) 8 tons medium-sized drivers main pump; K3V63DT (K3V63BDT); K3V112DT; K3V140DT; K3V180DT; K3V280; K3VG280; K3VG180; K3VL45; K5V80; K5V140 (doosan 300-7); K5V160 (modern 300-6 main pump); K5V200 (450/470 in Japan, god steel 470, Keith 480 main pump); K7V63; NV64; NV84; NV111DT; NV137; NV172; NV270; NX15; NVK45 steel drivers (god); KVC925; KVC930; KVC932.

KAWASAKI SWING SERIES:
M2X63; M2X96 (EX200-2); M2X120; M2X146 (EX200-5); M2X150/170 (EX400); M2X210 (EX270/280/300); M5X130 (CAT320C); M5X180 (steel 350-8 god); MX150; MX173; MX500; MAG150; MAG170; LZV30; LZV120; LVW060; TM40VD walk; Modern 300-5.

NABTESCO TRAVEL SERIES:
M2X63; M2X96 (EX200-2); M2X120; M2X146 (EX200-5); M2X150/170 (EX400); M2X210 (EX270/280/300); M5X130 (CAT320C); M5X180 (steel 350-8 god); MX150; MX173; MX500; MAG150; MAG170; LZV30; LZV120; LVW060; TM40VD walk; Modern 300-5.

REXROTH SERIES:
A4V40; A4V56; A4V71; A4V125; A4V250; A4VFO28; A4VSO40; A4VSO71; A4VSO125; A4VSO180; A4VSO250; A4VSO355; A4VSO500; A4VF500 / A4F500; A4VG28 (A4F571); A4VG40; A4VG45; A4VG50; A4VG56; A4VG71; A4VTG71; A4VG90 (32 A4VT90HW/r); A4VHW90; A4VTG90 fill oil pump (thick); A4VG125; A4VG125 pump; A4VG125 pump type (normal use); A4VG125 pump type A10VO28 (string); A4VG12 fill oil pump (giant); A4VG140; A4VG180; A4VG250; A10SO16/18; A10VSO28; A10VSO45; A10VSO45/52; A10VSO63/52; A10VSO63/53; A10VSO71; A10VSO85; A10VSO100; A10VSO140; A10VG18; A10VG28; A10VG45; A10VG63; A10V43 (double pump); A10V63; A10VD40 (double pump); A10VD43 (double pump); A10VE43; A10VEC60; A10VSF28; A11V040; A11VG35; A11VG50; A11VO60; A11VO75; A11VO95 (A11V95); A11V130; A11V145; A11V160; A11V190 (A11VLO190); A11VO200; A11VO250; A11VL0260.

REXROTH BEND AXIS SERIES:
A2F5;A2F12;A2F23;A2VK28;2VK28;A2F28;A2F55;A2F80;A2F107;A2F160;A2F200; A2V225;A2F250;A2V500;A2V915;A2F355;A2F500;A2F1000;A2FO10;A2FO12;A2FO16;A2FO23;A2FO28;A2FO32;A2FO45;A2FO56;A2FO63;A2FO80;A2FO90/A2FE90;A2FO107;A2FO125(A2FM125);A2FO160;A2FO180;A2FO200;A2FO250;A2FO500;A6V28;A7V55/A8V55;A7V58;A7V80/A8V80;A7V107/A8V107;A7V160/A8V160;A7V200;A7V225;A7V250;A7V355;A7V500;A6VM/A7V1000;A6VM/A7VO12;A7VO28;A7VO55;A7VO80;A7VO107;A7VO160;A6VM160;A6VE160;A6VM200;A6VM500;A7VO172;A7VO200;A7VO250;A7VO355;A7VO500.

REXROTH-UCHIDA SERIES:
1(REXROTH)A8VO55/A8VO80/A8VO80/6.3/A8VO107(SUMITOMO 280)/A8VO140/A8VO160/A8VO200
2(REXROTH)AP2D12( EPT 331MAIN PUMP)/AP2D16(CASE 35)/AP2D21/AP2D18(IHISCE 45 MAIN PUMP)/AP2D25(DH55 MAIN PUMP)/AP2D36/ZAX70 MAIN PUMP

SAUER SERIES:
PV20;PV21(PVD21);PV22;PVD22;PV23(PVD23);PV24;SPV6/119;PV25;PV26;PV112;OPV27;MF16A;MFO35;MF500;MPVO46/M46;MPR63;MPV45.

SAUER 90 SERIES:
PV90R30;PV90R42;PV90R55;PV90R75;PV90R100;BRL100;PV90R130;PV90R180;PV90R250;SPV14;SPV15;SPV18;MMF571C;MPT044;M44;HRR057.

EATON SERIES:
3321/3331 (Eaton, 006); Eaton 3322 (EATON3322); 4621/4621-007; 5421/5431 (Eaton 23); Keith 1460 (CASE1460); Keith CS05A; Eaton 3932-243; Eaton 6423; (Eaton 24-7620-7621); Roller (Eaton, 78462).

EATON-VICKERS SERIES:
PVE19;TA19;PVE21;PVH45;PVH57;PVH74;PVH81;PVH98;PVH106(HPN-1398);PVH131;PVH141;PVB5;PVB6;PVB10;PVB15(PVQ32);PVB20;PVB29;PVBQA29-SR;PVQ40/50;PVB110;TB35;B45.

TOKIWA SERIES:

MKV23/MKV33

TADANO SERIES:

(TADANO)100/150
HAWE SERIES :
V60A;V60A;V30D95;V30Z95;V30D140;V30D250
LINDE SERIES: 
HPV55T ; HPR75; HPR100; HPR105; HPR130; HMR135; HPR160; , 160; B2PV35; B2PV50 (BPR50); B2PV75 (BPR75); B2PV105 (BPR105); B2PV140; BPV35; BPV50; BPV70; BPV100; BMV75.27; BPR140; BPR186; BPR260; BMF50; BMF75; BMF105.
PARKER SERIES:
F11-005;F11-571;F11-571;F11-28;F11-39;F11-58;F12-060;F12-080/F12-090;F12-110-MF-1H;F11-150;F11-250;PVXS130;PVXS180;PVXS250;PVSO250;PV180;PV250;PLV250;PVM-018;PVM-571;BMHQ30/PV180;PAVC38;PAVC65;PAVC100;2145/P2145;23;PZ075;270/PV270;PVP76;PV29;PV74;PV0087;P76;PVG130 B;PSV600;PVT38;PVT38;PVT64;PK100;PMT14/18;P080;P2105;P2060;BZ732-100;SH5V/131.
YUKEN SERIES:
A16;A22;A37;A45;A56;A70;A90;A145
HARVESTER SERIES:
HPVMF23(T23C);HPVMF23.7;T28C;T30C;T37C

All these accessories are completely interchangeable with original, high quality and low price.

Our Company Service

1) We can help buyers design specific products or produce products according to buyers’design

2) We can print logo according to buyers’ requirement

3)We has exported to many countries,such as Korea, USA, German, etc.

 

Customer Service

1. You may email us through the Alibaba messaging system if you have a question

or would like to submit a comment.

2. Generally, email will be responded to within 24 hours; except on every Sunday

and holidays. We will reply as soon as we back in office.

2. We will send you tracking information to the e-mail address you have registered with Alibaba.

3. If you don’t see what you are looking for, just send us an e-mail with picture/picture

and we will be glad to help you.

4. Positive feedback is very important to us.

 

Packaging & Shipping
Delivery Details

Delivery time depends on the destination and other factors, it may up to 7 work days.

In order to ensure you receive you order tax free upon import, we will declare it as a “Sample”with a lower value.This lower price does not reflect the total price you paid.

After we ship the goods, we will email you the shipping information, as well as tracking number.

 

FAQ
Questions you maybe inquiry

Q1:Could you custom products?

We can manufacture it according to your drawings or samples.

Q2: I want to buy your products, how can I pay?

A :You can pay via T/T , WEST UNION or other payment terms we reach agreement.

Q3: How can you guarantee the quality?

A: One year’s warranty against B/L date.

If You meet with quality problem, we promise to responsible for it.

Q4: If we don’t find what we want on your website, what should we do?

A: You can email us the descriptions and pictures of the products you need, We will check whether we can make it.

Q5: Can we buy 1 pc of each item for quality testing?

A: Yes, we understand quality test is important and we are glad to send 1pc for quality testing.

Q6: What is the lead time?

A: For this product, normally 3 days,3 days and lead time is calculated from the day we receive your deposit.

Exact time is determined by factory schedule.

 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Sauer China in Davao City Philippines gear grip flexible shaft couplings supplier Mf500 in Fukuoka Japan motor and gearbox coupling factory Hydraulic Spare Parts Manufacturers Direct Sales with top quality lowest price

Hot China in Kirkuk Iraq gear grip flexible shaft couplings near me shop Selling in Cheonan Republic of Korea sier bath coupling Good Price Female Thread Stainless Steel Ball Valve with top quality lowest price

Hot China in Kirkuk Iraq gear grip flexible shaft couplings near me shop Selling in Cheonan Republic of Korea sier bath coupling Good Price Female Thread Stainless Steel Ball Valve with top quality lowest price

We – EPG Group the most significant couplings and gears manufacturing unit in China with five distinct branches. For more information: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828 /

Scorching Selling Great Value Feminine Thread Stainless Metal Ball Valve

Size:  1/4′-32′ or DN50-DN800
Stress:  Class150-1500LB or PN16-PN160 or 10K-40K
Design & Manufacture Std:  API608, ASME B16.34, API6D, BS5351,DIN,JIS
Face to Face Std:  ASMEB16.10 (JISB2002),API 6D, DIN3202, ASME B16.twenty five
End Connection Std:

 ASME B16.5,ASME B16.47, JISB2212-JISB2214, DIN2543-2550,ASME B16.34
Structure Type:

 One-piece, Two-piece, Three Piece, Reduced bore,  Full bore Floating type(one/2 -10 ), 

trunnion type(2 -32)
Substance:  Stainless metal,Brass,Bronze
Thread:  NPT,BSP,DIN2999,BSPT
Medium:  Water,Oil,Fuel and other medium

Dimensions φd L H W C TORQUE
N.M		 Finish
1/4″ five forty 28 seventy five ten three BSP, BSPT,NPT, PT, DIN….
3/eight” 7 45 31 ninety 10.five three
one/2″ nine fifty seven 34 ninety five thirteen.5 three
3/4″ 12 60 43 ninety five 14 four.5
1″ 15 seventy two 52 111 sixteen.5 5
1-one/four” twenty seventy eight 52 124 19 seven
1-one/2″ 25 eighty three 65 139 19 eight
2″ 32 ninety nine 70 152 23.five 16
2-1/two” 38 130 95 two hundred 31.5 21
3″ forty eight one hundred fifty 102 200 32 26
4″ sixty five 192 133 250 forty four forty

Materials:stainless steel ,brass , bronze   
Measurement:1/4”-4”  
Thread:NPT, BSP, DIN2999, BSPT  
Doing work pressure1000psi , 2000psi  
Temperature variety-20-220ºC  
Medium H2o, oil, gasoline and other medium  
Variety:two-way 3-way 1-way  

Q.Are you the factory or the buying and selling organization?
one.We are a factory centered on the valve and pipe fitting.
2.Our primary goods are elbow,coupling,adaptor,flange and valve.
3.We have 6 production lines sophisticated equipment above thirty like friction presses,air hammer,punching machines,and so on.
four.We very own warehouse over 3000 sq. meters.
five.We have many distributors at residence and board.
Q.How do you manage your top quality?
1.Assortment of higher top quality metal substance from renowned metal team.
2.Manufacturing approach standardization,process standardization,refinement.
3.The 3rd celebration merchandise inspections are acceptable.
four.ISO High quality Administration Technique Certificated Manufacturing unit
5.Inspection ahead of loading.
Q.When can I get the quotation?
Usually inside of 24 hrs,if it is urgent,pls get in touch with me.
Q.What is actually your iteam of delivery?
Normally within thirty times,in accordance to the purchase,welcome to visit our manufacturing facility and to be friends with you.

 

/ The use of authentic gear manufacturer’s (OEM) portion numbers or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating item use and compatibility. Our company and the shown EPT components contained herein are not sponsored, authorized, or made by the OEM. /

Hot China in Kirkuk Iraq gear grip flexible shaft couplings near me shop Selling in Cheonan Republic of Korea sier bath coupling Good Price Female Thread Stainless Steel Ball Valve with top quality lowest price