We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/
Description:
This monitor is made of stainless steel which is widely used on water truck fire truck, boat, chemical factory, airport, tower, wharf etc. The key parts are selected. The motors are imported from USA and ZheJiang . The sensors are imported from Germany. Each Monitor is well tested before delivery. All the monitors are CCC certified.
Features:
1. Good Material: Stainless steel monitor body and aluminum hard anodized nozzle.
2. Adjustable Nozzle: The flow rate is 80L/S.
3. Selected key parts: Motors are imported from USA and ZheJiang . Sensors are imported from Germany.
4. Remote Control is available.
5. Water way is 3” which is big enough for the max flow 80L/S.
6. Stream Sharper is available to make sure good performance.
7. Control box works on off road.
8. The warranty is 2 years.
Specification:
| Weight in Kg Incl. Nozzle Approx. | 24KG | Range of Motion | +/-90°vertical , 350°Horizontal | |
| Other Degrees Adjustable | ||||
|
Material |
Body Stainless 304(standard) Stainless 316 (optional) | Speed (of high speed version) |
24°/sec rotation , 10°/ sec vertical | |
| Aluminum Hard Anodized Nozzle | Power Consumption Max. | 24V @ 7.5A | ||
| Gear bronze | Power Supply | 24 VDC | ||
|
Flow Range @ 7 bar |
Nozzle Model: AN40 – 24Vdc Jet Spray Nozzle – Adjustable |
Reaction Force | Up to 900N | |
| Mechanical Installation | Support must withstand 4000 N of force | |||
| Flow Rates of: 4800 LPM @100PSI | Options | Network, radio remote , aux control etc. | ||
| Max. Reach @ 7 bar | 85M |
TYPE: PSKD80
Flow Range: 80L/S Automatic Nozzle
Working Pressure: 6 bar~ 10 bar
Max Reach @ Max Flow: 85m
Max. Range of motion: +/-90°Vert , 350°Rot
Max fog angle :120°
Turning speed:18 degrees/sec
Material (body):304L Stainless Steel, 316L Stainless Steel is also available
Material (Gear):hardcoated anodizing aluminum
Material (nozzle):Aluminum
power supply:12/24VDC or 100-230VAC
Power Consumption normal/Max:50W/150W
Weight incl. nozzle:appox 28kg
Cable Length Monitor- CPU:5m
Cable Length Joystick-CPU:5m standard/ other length available
Pump requirement for minimum performance:80L/S@ 8 bar
Pipe dimensions for installation: 3 Inch
Monitor Inlet :3″ male BSP or DN100 flange
Monitor Outlet:2.5 inch (65mm)
Water way size: 3 inch
PACKAGE: SS MONITOR, NOZZLE, CONTROL BOX, JOYSTICK, CABLES, WIRELESS CONTROL (OPTIONAL)
System Components Description:
| NAME | FIRE MONITOR BODY | 24Vdc EPT JET SPRAY NOZZLE | JOYSTICK |
|
PART IMAGE |
|||
| PART# | PSKD80 | AN40 | CTRL – J01 |
|
BRIEF DES- CRIPTION |
24Vdc EPT Remote Controlled | Selectable Flow Rates Of | Up-down-left-right,straight stream/fog function |
| 2 ½ “NH outlet | 1200 LPM 1800LPM 2400LPM @ 100PSI | Power indicator | |
| Stainless steel 2 ½” waterway | IP67 standard seal actuator | Aluminum base | |
| Bronze worm , stainless steel gear | Fixed fog teeth | ||
| 2 ½” ANSI 150# Inlet flange | |||
| NAME | CONTROL UNIT | Straight Bore Branch Pipe Nozzle OPTIONAL | CABLES |
|
PART IMAGE |
|
||
| PART# | CU-01 | SN-32 | CTRL-CB01 / CTRL-CB02 |
|
BRIEF DES- CRIPTION |
Aluminum cover | Hard Anodized Stacked Tip Branch Pipe Nozzle c/w Inbuilt Stream Shaper – 32mm End Nozzle Orifice Tip | Joystick to Control Unit cable- 5m length |
| IP67 Standard sealed | Monitor to Control Unit cable- 12m length | ||
| 2 ½” NH Female Inlet | Other length cables please specify | ||
More Photos:
Machining, Warehouse and Testing Building:
Fire fighting Exhibition in ZheJiang
Our Company
Since the company was founded in 1996, SXFIREPRO has evolved and grown from a small factory in the yard with the limited capacity to only make couplings, to a sophisticated and leading factory, that now spans over 35000 square meters and employs over 60 skilled engineers, craftsmen, and mechanics – a figure that continues to grow. As one of the family-owned fire equipment manufacturers in China, SXFIREPRO continues to instill the tradition of product excellence, acute customer care, and superior service.
Over the past few years, SXFIREPRO has pushed and expanded its product line to fire monitors, fire nozzles, bladder foam tanks,foam concentrate,fire robots, etc., Unlike most fire equipment manufacturers, sxfirepro also delivers on the meaning of custom-crafted appatatus. Working side-by-side with each customer, sxfirepro will construct your vehicle based on your specific department’s needs, The Sheng EPT team – from the best engineers and draftsmen to highly skilled mechanics and craftsmen will always give you a surprise on the quality. An sxfirepro product is as unique as our customers.
FAQ
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free if the cost is below USD20 with freight on your cost.
Q: How long is your delivery time?
A: Generally it is 5 days if the goods are in stock. Or it is 15 days if the goods are not in stock, it is according to quantity.
Q. what is your payment term?
A: T/T 30% payment in advance, balance to be paid prior shipment.
Q: what is your main market?
A: ,Western Europe,North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia.
Q: Can I have my own EPT product?
A: Yes, we can supply logo Print and package desiged based in our MOQ.
/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.
/
